FinePix 3800 Owner's Manual - Fujifilm Canada

223Press the “z OPEN” button to make the flashpop up.Immediately after you select Photography mode,the viewfinder (EVF) switches on. You canchoose whether to use the viewfinder (EVF) orthe LCD monitor to take pictures by pressing the“EVF/LCD” button to switch between the two.2●! If the photography mode is “R”, use the AutoFlash mode.●! When the flash is popped up or you are using theflash to take pictures, you may see the imagedisappear and the screen go dark as the flashcharges. The indicator lamp blinks orange while theflash is charging.●! If you use the flash in very dusty environments orwhen it is snowing, the flash may reflect offsnowflakes or floating dust particles so that theyappear as glowing white dots on your image.●! You can specify individually whether the viewfinder(EVF) or the LCD monitor is used in the Photographyand Playback modes.Mode Default setting After switchingqPhotography mode EVF LCD monitorwPlay back mode LCD monitor EVF✽ The selection reverts to the default setting when youswitch the camera off.23