IronPort - advanced configuration guide

Chapter 5 Email Authentication
OL-25137-01
The maximum allowed difference in time (in seconds) between the sender’s system time and
verifier’s. For example, if the message signature expires at 05:00:00 and the verifier’s system time
is 05:00:30, the message signature is still valid if the allowed difference in time is 60 seconds but it
is invalid if the allowed difference is 10 seconds. The default is 60 seconds.
An option whether to use a body length parameter.
The SMTP action to take in case of a temporary failure.
The SMTP action to take in case of a permanent failure.
You can search through all of your existing verification profiles by the profile name.
You can export your DKIM verification profiles as a text file in your Cisco IronPort appliance’s
configure directory. When you export the verification profiles, all of the profiles existing on the
appliance are put into a single text file. See Exporting DKIM Verification Profiles, page 5-19 for more
information.
You can import DKIM verification profiles that you previously exported. Importing DKIM verification
profiles causes all of the current DKIM verification profiles on the machine to be replaced. See
Importing DKIM Verification Profiles, page 5-19 for more information.
Creating a DKIM Verification Profile
To create a DKIM verification profile:
Step 1 Click Mail Policies > Verification Profiles.
Step 2 Click Add Profile. The Add DKIM Verification Profiles page is displayed:
Cisco IronPort AsyncOS 7.6 for Email Advanced Configuration Guide
5-17