IronPort - advanced configuration guide

8-8
- ADDGROUP - Add a cluster group.
- SETGROUP - Set the group that machines are a member of.
- RENAMEGROUP - Rename a cluster group.
- DELETEGROUP - Remove a cluster group.
- REMOVEMACHINE - Remove a machine from the cluster.
- SETNAME - Set the cluster name.
- LIST - List the machines in the cluster.
- LISTDETAIL - List the machines in the cluster with detail.
- DISCONNECT - Temporarily detach machines from the cluster.
Joining an Existing Cluster over CCS
Cisco IronPort AsyncOS 7.6 for Email Advanced Configuration Guide
Chapter 8 Centralized Management
- RECONNECT - Restore connections with machines that were previously detached.
- PREPJOIN - Prepare the addition of a new machine over CCS.
[]>
(Cluster americas)>
Use CCS instead of SSH if you cannot use SSH. The only advantage of CCS is that only cluster
communication happens over that port (no user logins, SCP, etc). To add another machine to an existing
cluster via CCS, use the prepjoin subcommand of clusterconfig to prepare the machine to be added
to the cluster. In this example, the prepjoin command is issued on the machine newyork to prepare the
machine losangeles to be added to the cluster.
The prepjoin command involves obtaining the user key of the host you want to add to the cluster by
typing clusterconfig prepjoin print in the CLI of that host, and then copying the key into the
command line of the host that is currently in the cluster.
Choose the operation you want to perform:
- ADDGROUP - Add a cluster group.
- SETGROUP - Set the group that machines are a member of.
- RENAMEGROUP - Rename a cluster group.
- DELETEGROUP - Remove a cluster group.
- REMOVEMACHINE - Remove a machine from the cluster.
- SETNAME - Set the cluster name.
- LIST - List the machines in the cluster.
- LISTDETAIL - List the machines in the cluster with detail.
OL-25137-01