IronPort - advanced configuration guide

Chapter 1 Customizing Listeners
OL-25137-01
[]> list
Enabling a Certificate for HTTPS
Rate Bounce Bounce
Domain Limiting TLS Verification Profile
=========== ======== ======= ============ =========
partner.com Default Req Default Default
(Default) On Off Off (Default)
There are currently 2 entries configured.
Choose the operation you want to perform:
- SETUP - Change global settings.
- NEW - Create a new entry.
- EDIT - Modify an entry.
- DELETE - Remove an entry.
- DEFAULT - Change the default.
- LIST - Display a summary list of all entries.
- DETAIL - Display details for one destination or all entries.
- CLEAR - Remove all entries.
- IMPORT - Import tables from a file.
- EXPORT - Export tables to a file.
[]>
You can enable a certificate for HTTPS services on an IP interface using either the Network > IP
Interfaces page in the GUI or the interfaceconfig command in the CLI. When adding an IP interface
via the GUI, select a certificate that you want to use for the HTTPS service, check the HTTPS check
box, and enter the port number.
In following example, the interfaceconfig command is used to edit the IP interface PublicNet to enable
HTTPS services on port 443 (the default port). All other defaults for the interface are accepted. (Typing
Enter at the prompt accepts the default value shown in brackets.)
Cisco IronPort AsyncOS 7.6 for Email Advanced Configuration Guide
1-35