Geared motors

Dimensions - Shaft-mounted helical gearboxes (low-profile gearboxes)Further dimensions GFLòòHollow shaft with shrink discPosition 6 Position 14Gearbox Machine shaft *) Hollow shaft Gearbox Coversize d Fit l l 1 f 5 g 2 k 10 g 3 k 11042530h6 142 122 26 72 146 79 4105 35 h6 168 148 28 80 171 90 4306 40 h6 194 164 30 90 197 100 4907 50 h6 232 192 26 110 234 124 4909 65 h6 278 228 30 141 281 159 5211 80 h6 338 238 42 170 344 191 6514 100 h6 407 307 55 215 415 253 78* Ensure sufficient shaft material strength when using shrink disc models. If common steel is used(e.g. C45, 42CrMo4), the torque values given in the selection tables can be transmitted without restriction.If less rigid materials are being used, please contact us. The average surface roughness Rz should not exceed 15 µm(turning is sufficient).Possible combinations of shrinks discs on the drive side (position 1)GearboxGeared motors GFLòò-2E with motor frame sizesize 063 071 080 090 100 112 1320405 1) 1)06 1) 1)07 1)09 11 14 1) Without coverOn the GFLòò-2E with shrink disc in position 1, the 8200 motec cannot be in position 4.All combinations are possible on the GFLòò-3E.Dimensions in [mm]4-48 G-motion motec en 11/2004