Geared motors

8200 motec automationI/O function modulesBUS I/OBUS I/O – Can be used in 8200 motec 0.25 - 0.37 kW Order no. E82ZMFB001– Can be used in 8200 motec 0.55 - 2.2 kW Order no. E82ZAFB001– Can be used in 8200 motec 3.0 - 7.5 kW Order no. E82ZAFB201The "BUS I/O" I/O function module provides the inverterwith digital inputs and outputs for standard applications.Fieldbus communication is also possible in conjunction with afieldbus function module. The function module is installed inthe carrier housing of the 8200.Note:– Please note change in overall height on BUS I/O for0.25/0.37 kW.– When ordering the BUS I/O, always add afieldbus function module to your order.Available input/output terminalsAnalog IN Analog OUT Digital IN Digital OUT1 1 4 1) 11) Optional frequency input 0…10 kHz single-track (via I1) or 0…1 kHz twotrack(via I1 and I2) 8200 motec E82MVxxx_xxxxxXXxx2x or later(please note dimension g 1 in the dimensions tables for geared motors).Terminal assignmentInternal voltage supplyExternal voltage supplyGND2GND2X3GND1+5V +20V62 8 9 7 20 28 E1 E2 E3 E4 39 A1 59GND1+5V +20VX3 762 8 9 20 28 E1 E2 E3 E4 39 A1 59AOUT1AIN1DIGOUT1AOUT1AIN1DIGOUT10…+5V8 9 71k … 10k0…+5V8 9 71k … 10k_+24 V ext.(+12 V DC - 0 %...+30 VDC+0%,max. 120 mA)Minimum wiring required for operationElectrical connectionScrew terminalsConnection options Rigid: 1.5 mm 2 (AWG 16)Flexible:1.0 mm 2 (AWG 18) without wire end ferrule0.5 mm 2 (AWG 20) with wire end ferrule without plastic sleeve0.5 mm 2 (AWG 20) with wire end ferrule and plastic sleeve99-32 G-motion motec en 11/2004