abrasive belt tools

144 STATIONARY MACHINESVersatility Grinder Contact ArmsPart Number Comments Belt Size Contact Wheel Assembly Platen Pad(includes bearing and shaft)67210 • Polish contours without gouging 5/8" to 11642 Noneworkpiece 1" x 72" 40 durometer, serrated, scoop4" dia. x 5/8" wide, rubber67211 • Blend fillet welds; excellent for 1/2" to 11638 Nonetight radius work 1" x 72" 70 durometer, severe radius4" dia. x 1/2" wide, rubber67212 • Use contact wheel or 1/2" x 72" 11078 11025*platen area for grinding 70 durometer Soft/spongeand finishing 5/8" dia. x 3/8" wide, rubber platen67213 • Cutlery contact arm assembly 2" x 78" 67122 11839incorporates a large diameter 50 durometer, smooth Hard/corkcontact wheel and a raised 4" dia. x 2" wide, Rubber platenplaten assembly for completefinishing capabilities67214 • Grind and deburr using either 1" x 72" 11650 11605**the serrated contact wheel 70 durometer, serrated Hard/corkor platen assembly 2" dia. x 1" wide, urethane platen67215, 67216 • Aggressive grinding applications 67215 11847: None2" x 72" 70 durometer, serrated2" dia. x 2" wide, urethane67216 65363 None1-1/2" x 72" 70 durometer, serrated2" dia. x 1-1/2" wide, urethane67217 • Using contact wheel, finish 1-1/2" x 72" 65378 Noneusing 1-1/2" wide abrasives;70 durometer, flat9/16" radius or greater 1"dia. x 1-1/2" wide, urethane67218 • Excellent for very fine finishing 1" x 72" 67068 Nonework; use when extreme4" dia. x 1/2" wideconformability is necessary.cotton cushion67219 • Material removal applications, 2" x 72" 67116 Nonecastings, etc.2-3/4" dia. x 2" wide, rubber90 durometer, serrated67220, 67221, 67222, 67223 • Turbine blade clusters 67220 11332 None• Great for strap polishing 1/2" x 72" 1/4" dia. x 3/8" wide, steelin offset areas67221 11068 None1/2" x 72" 5/16" dia. x 3/8" wide, steel67222 11352 None3/4" x 72" 5/16" dia. x 5/8" wide, steel67223 11342 None1/2" x 72" 50 durometer5/16" dia. x 3/8" wide, rubber67224 • Grind, blend and polish welds; 1" x 72" 11620 Nonestrap polish using slack of belt.40 durometer, rubber4" dia. x 1" wide, smooth67226, 67227 • Access tight areas 67226 11049 None1/2" x 72" 3/16" dia. x 3/8" wide, steel3-1/8" reach, 3 required67227 11049 None1/2" x 78" 3/16" dia. x 3/8" wide, steel6-1/2" reach, 3 required* Also accepts 11026 Hard/Cork and 11027 Thin Platen ** Also accepts 11604 Soft/Sponge Platen