abrasive belt tools

ABRASIVE BELT TOOLS 17Mini-Dynafile ® II Contact Arms3" Workable Reach; Exclusive to the Mini-Dynafile ® IITo maximize the life of1/4” bearings, lower theoperating air pressure to45 PSIG (3.1 Bar) and runthe motor at a lower RPM.Part Number Comments Belt Size Contact Wheel Assembly Platen Pad(W x L) (includes bearing and shaft)15026 • Standard on 1/2" x 12" 11078 11026Model 15003 5/8" dia. x 3/8" wide, rubber 1/2" wide• Grind corners,enter grooves15027 • Sand on both sides 1/4" x 12" 11074 11033of arm 5/8" dia. x 1/8" wide, rubber 1/4" wide• Enter confined areasas small as 1/4"15028 • No platen due to 1/4" or 11080 Noneoffset design 1/2" x 12" 1" dia. x 3/8" wide, rubber• Grind radiuses• Offset forslack polishing15029 • Grind corners, enter 1/8" x 12" 11086 Nonegrooves and1" dia. x 3/8" wide, urethanestrap polish15030 • 45 PSIG maximum 1/2" x 12" 11068 11027• Enter channels as 5/16" dia. x 3/8" wide, steel 1/2" widenarrow as 7/16"15031 • 45 PSIG maximum 1/2" x 13" 11070 11027• Work on contact wheel 7/16" dia. x 3/8" wide, rubber 1/2" wideor platen pad15032 • 45 PSIG maximum 1/2" x 12" 11332 None• Grind, blend and1/4" dia. x 3/8" wide, steelpolish turbine blades15033 • 45 PSIG maximum 1/4" x 12" 11342 None• Grind, polish turbine5/16" dia. x 3/8" wide, rubberblades and othercontours