abrasive belt tools

2006 Ind Cat_Accessories:2006 Industrial Catalog.qxd 9/27/06 5:42 PM Page 187ACCESSORIES 187ArborsUse to Mount Abrasive Wheels, Discs, Pneumatic Wheels, etc.Suggested Mounting Options forArbor Mount Sanding StarsThe spacing of stars on the arbor, as well as the grit, determine desiredsanding aggressiveness. We suggest that the operator explore variousgrit and spacing combinations based on the following guidelines.Most Aggressive/Less FlexibleSix stars, one spacer. For heavier stock removal; work on flats, edges,larger surfaceareas, great fordefuzzing hardwoods.Least Aggressive/Most FlexibleTwo stars, up to ten spacers. For light stock removal reaching intosmall holes, cut-outs,heavy contours, tightgrooves; great fordefuzzing soft woods.“Universal” Shank Arbor• Handy accessory fits drills and die grinders!• Mount sanding stars, flap wheels, unitized wheels, non-wovennylon wheels, buffs, etc.• High quality steel arbor; all flanges and spacers included.Part Number 12995Arbor – 1/4" ShankPart Number 12977Arbor – 6 mm Shank• Both arbors accept accessories up to 1" (25 mm) wide which have1/2" (13 mm) dia. center hole.Part Number 12980Arbor – 3/8"-24 Female Thread• Mounts to 3/8"-24 male spindle tools.Threaded MandrelsFor Use with 3M Clean ’N Strip DiscsPart Number 95722• 1/4" diameter with 1/4" shank.• For 3M Clean ’N Strip discs.Part Number 95749• 1/2" diameter with 1/4" shank.• For 3M Clean ’N Strip discs.Drill ChucksWith Mated KeysKeys Included with all Drill ChucksChuck Size Thread Chuck Part No. Key Part No.5/32" 5/16"-24 Female 53031 530511/4" 3/8"-24 Female 53032 530521/2"-20 Female 53033 530533/8"3/8"-24 Female 53087 530531/2" 1/2"-20 Female 53034 53054Clean ’N Strip is a registered trademark of 3M CompanyDisc Mount AssemblyPart Number 502634-1/2"–5" (114-127 mm) Dia. Discs• 50264 Mount and 50268 Flange Nut have5/8"-11 thread.• Accepts discs with center hole.• 1-3/4" (44 mm) diameter mount allows formaximum disc flexibility.Wheel MountingAdapter KitPart Number 11399Type 27 Wheel Mount• For use with larger than5" (127 mm) dia. Type 27grinding wheels mounted ondepressed center wheel grinders.NOTE: Use only Type 27reinforced depressed center wheels.