abrasive belt tools

More documents

Recommendations

Info

26 ABRASIVE BELT TOOLSDynangle ® IIAir-Powered Abrasive Belt ToolPolish, Grind Contours and FlatsABRASIVE BELTS2" wide x 34" or 45" long(51 mm x 864 mm, 1143 mm)• Surface conditions stainless steel and most other metals.Also used on wood, plastic, fiberglass and composites.Blends and finishes solder seams.• Built-in abrasive belt guard;fast belt change.• Safety-lock lever-throttle; hangerbrackets included for optionaloverhead suspension.Model 14300Model 14300 Single Motor• Uses 2" x 34" belts; belts spans 11-1/2" for “strap polishing”up to 36" diameter pipe.• 14350 Conversion Kit available to upgrade single motor modelto a dual motor model at a later date, if desired.NOTE: For grinding with a platen pad, dual motor models arerecommended.Model 14303 Heavy-Duty “Dual Motor” with Platen• Heavy-duty “dual motor” for extra power.• Uses 2" x 34" belts; belts spans 11-1/2" for “strap polishing”up to 36" diameter pipe.• Includes 2" wide x 6" long platen which is easily removed forstrap polishing.Model 14306 Heavy-Duty “Dual Motor” with Platen• Heavy-duty “dual motor” for extra power.• Uses 2" x 45" belts; belts spans 17" for polishing pipe up to48" diameter.• Includes 2" wide x 6" long platen which is easily removed forstrap polishing.14300 Dynangle ® II is utilized for “strap polishing” on a cylindricalstainless steel surface.Model 14303For optimum use of Dynangle ® II,it is critical that proper air flow ismaintained.To maintain belt tension, use“J-Weight” abrasive belts withlow-flex or low-stretch backing.Model Motor Motor Sound Abrasive Belt Size Maximum Air Flow Max. SFPM Weight Length HeightNumber hp (W) RPM Level Inch (mm) SCFM (LPM) (SMPM) Pound (kg) Inch (mm) Inch (mm)14300 1.2 (895) 13,000 85 dB(A) 2 (51) W x 34 (864) L 53 (1,501) 8,500 (2,591) 15.1 (16.9) 18-7/8 (479) 8-1/2 (216)14303 2.4 (1,790) 13,000 85 dB(A) 2 (51) W x 34 (864) L 106 (3,002) 8,500 (2,591) 18.7 (8.2) 18-7/8 (479) 9-9/16 (243)14306 2.4 (1,790) 13,000 90 dB(A) 2 (51)W x 45 (1,143) L 106 (3,002) 8,500 (2,591) 19.2 (8.7) 22-7/8 (581) 9-1/2 (241)Additional Specifications: Air Inlet Thread 1/2" NPT • Hose Size 1/2" (13 mm) • Air Pressure 90 PSIG (6.2 Bar)Tune-Up Kit: No. 96011 (Dual motor models require two Tune-Up Kits) • Recommended Air Line Accessory: 98273 Coupler/Plug Assembly (page 161)Abrasive Belts: Page 211 • Accessories: Page 159
ABRASIVE BELT TOOLS“Take-About ” SanderAir-Powered Abrasive Belt ToolIdeal for Surface Leveling, Graining and FinishingABRASIVE BELTS3” wide x 24” long(76 mm x 610 mm)27Model 52900• Heavy-duty 1.3 hp sander (12,000 RPM) powers 3" x 24" abrasivebelts, for aggressive material removal on metal and wood.• Toggle switch offers simple one-step belt tensioning.• Pistol-grip handle and top control knob allow enhancedoperator control.• Easily adjustable tracking of abrasive belt.• Tool works well with non-woven nylon belts.• Safety-lock throttlelever is included.Dynaswivel ® air line connector is idealfor use with most air tools.The Dynaswivel ® improves toolmaneuverability, minimizesoperator fatigue and extendshose life. (See page 163.)Model 52900Model Motor Motor Sound Abrasive Belt Size Maximum Air Flow Max. SFPM Air Inlet Weight Length HeightNumber hp (W) RPM Level Inch (mm) SCFM (LPM) (SMPM) Thread Pound (kg) Inch (mm) Inch (mm)52900 1.3 (969) 12,000 88 dB(A) 3 (76) W x 24 (610) L 50 (1,416) 1,700 (516) 3/8" NPT 12.5 (5.7) 13-1/4 (337) 7-1/8 (181)Additional Specifications: Air Pressure 90 PSIG (6.2 Bar) • Hose I.D. Size 1/2" (13 mm) • Recommended Accessory: 98265 Coupler/Plug Assembly (page 161)Platen PadsProvide Belt Support on Dynabrade Abrasive Belt ToolsSoft Platen Pads • Top facing • Sponge base • Pressure sensitive adhesivePartPackageNumber For Use on These Tools Width Length Thickness Quantity11032 Dynafile ® , Dynafile ® II 1/4" 7" 1/8" 511025 Dynafile ® , Dynafile ® II, Dynafile ® III 1/2" 7" 1/8" 511119 Dynafile ® II 3/4" 7" 1/8" 515323 Dynafile ® III 1" 2" 1/8" 5For work oncontoured pieces1/8"(3 mm)11025 PlatenPad affixed to11218 Dynafile ®Contact ArmHard Platen Pads • Top facing • Cork base • Pressure sensitive adhesivePartPackageNumber For Use on These Tools Width Length Thickness Quantity11033 Mini-Dynafile ® II 1/4" 7" 1/8" 511026 Dynafile ® , Dynafile ® II, Mini-Dynafile ® II, Dynafile ® III 1/2" 7" 1/8" 511109 Dynafile ® II, Dynafile ® III 3/4" 7" 1/8" 515324 Dynafile ® III 1" 2" 1/8" 5For heavy deburring andpolishing1/8"(3 mm)Thin Platen Pads • Top facing • Pressure sensitive adhesivePartPackageNumber For Use on These Tools Width Length Thickness Quantity11034 Dynafile ® , Dynafile ® II 1/4" 7" 1/32" 511027 Dynafile ® , Dynafile ® II, Mini-Dynafile ® II 1/2" 7" 1/32" 511129 Dynafile ® II 3/4" 7" 1/32" 5For use with Contact Armswith small diameter ContactWheels (such as 11212)1/32"(.8 mm)Abrasive Belts: Page 211 • Accessories: Page 159
Page 2 and 3: 2 TABLE OF CONTENTSIntroductionGene
Page 4 and 5: 4 INTRODUCTIONGeneral Product Infor
Page 6 and 7: 6 INTRODUCTIONGuide to Catalog Symb
Page 8 and 9: 8“The Original ” Dynafile ®Air
Page 10 and 11: 10 ABRASIVE BELT TOOLSDynafile ®4"
Page 12 and 13: 12.4 hp Dynafile ® IIAir-Powered A
Page 14 and 15: 14 ABRASIVE BELT TOOLSDynafile ® I
Page 16 and 17: 16Mini-Dynafile ® IIAir-Powered Ab
Page 18 and 19: 18Dynafile ® IIIAir-Powered Abrasi
Page 20 and 21: 20 ABRASIVE BELT TOOLSDynafile ® I
Page 22 and 23: 22ABRASIVE BELT TOOLSDynabelter ®A
Page 24 and 25: 24 ABRASIVE BELT TOOLSDynabelter ®
Page 28 and 29: Dynastraight ® ...................
Page 30 and 31: 30ABRASIVE FINISHING TOOLSDynastrai
Page 32 and 33: 32Dynastraight ®Air-Powered Abrasi
Page 34 and 35: 34Dynastraight ®Air-Powered Abrasi
Page 36 and 37: 36 ABRASIVE FINISHING TOOLSDynaRove
Page 39 and 40: ABRASIVE FINISHING TOOLSElectric Dy
Page 41 and 42: ABRASIVE FINISHING TOOLSLightweight
Page 43 and 44: Industrial DynaZipIndustrial-Qualit
Page 45 and 46: Dynorbital-Spirit ® & Dynorbital
Page 47 and 48: Dynorbital-Spirit ®Air-Powered Ran
Page 49 and 50: RANDOM ORBITAL SANDERSMesh Abrasive
Page 51 and 52: Dynorbital ®SupremeAir-Powered Ran
Page 53 and 54: Two-Hand Dynorbital ®Air-Powered R
Page 55 and 56: RANDOM ORBITAL SANDERS557° Offset
Page 57 and 58: RANDOM ORBITAL SANDERS57Right Angle
Page 59 and 60: RANDOM ORBITAL SANDERS11" Dia. Elec
Page 61 and 62: DynaLocke ®Air-Powered Dual-Action
Page 63 and 64: GEAR-DRIVEN AND FINISHING SANDERSGe
Page 65 and 66: “Backsplash ” SanderAir-Powered
Page 67 and 68: GEAR-DRIVEN AND FINISHING SANDERSDy
Page 69 and 70: Dynabug ® Orbital SanderAir-Powere
Page 75 and 76: Wet Dynorbital ® Supreme .........
Page 77 and 78:
Wet Dynorbital ®SupremeAir-Powered
Page 79 and 80:
WET SANDERS79Wet Dynafine ®Air-Pow
Page 81 and 82:
Dynabuffer ........................
Page 83 and 84:
BUFFERS AND POLISHERS“Two-Step
Page 85 and 86:
BUFFERS AND POLISHERS3" Diameter Bu
Page 87 and 88:
BUFFERS AND POLISHERS5"-8" Diameter
Page 89 and 90:
Straight-Line Buffer.4 hp and .7 hp
Page 91 and 92:
Pencil Grinders ...................
Page 93 and 94:
Pencil GrindersTurbine-Driven Air M
Page 95 and 96:
.33 hp Die GrinderRight Angle, Gear
Page 97 and 98:
.4 hp Die GrindersStraight-Line, Ge
Page 99 and 100:
.4 hp Die GrindersRight Angle, Fron
Page 101 and 102:
.5 hp Die GrindersStraight-Line, Ge
Page 103 and 104:
DIE GRINDERS.5 hp Die Grinders7° O
Page 105 and 106:
.7 hp Die GrindersStraight-Line, Fr
Page 107 and 108:
1 hp Die GrindersStraight-Line, Rea
Page 109 and 110:
DIE GRINDERS1 hp Extension Grinders
Page 111 and 112:
2" Dia. Disc Sanders.4 hp and .5 hp
Page 113 and 114:
3" Dia. Disc Sanders.4 hp, .55 hp a
Page 115 and 116:
DISC SANDERS4-1/2" Dia. Disc Sander
Page 117 and 118:
DISC SANDERS4-1/2"-5" Dia. Disc San
Page 119 and 120:
Depressed Center Wheel Grinders ...
Page 121 and 122:
GRINDERSDepressed Center Wheel Grin
Page 123 and 124:
GRINDERSDepressed Center Wheel Grin
Page 125 and 126:
GRINDERSType 1 Wheel GrindersAir-Po
Page 127 and 128:
GRINDERSCut-Off Wheel ToolsAir-Powe
Page 129 and 130:
GRINDERSVacuum Cut-Off Wheel ToolsA
Page 131 and 132:
DrillsAir-Powered Drills, Angle Hea
Page 133 and 134:
DrillsAir-Powered Drills, 3/8" Chuc
Page 135 and 136:
DRILLS AND SPECIALTY TOOLSStockade
Page 137 and 138:
Dynadie ® IIIAir-Powered Reciproca
Page 139 and 140:
Versatility Grinders ..............
Page 141 and 142:
Versatility GrinderElectric Abrasiv
Page 143 and 144:
STATIONARY MACHINESVersatility Grin
Page 145 and 146:
STATIONARY MACHINESVersatility Grin
Page 147 and 148:
STATIONARY MACHINESElectric Tool Po
Page 149 and 150:
STATIONARY MACHINESWet Deburring St
Page 151 and 152:
Portable Vacuum SystemsChoose from
Page 153 and 154:
DUST COLLECTION SYSTEMSElectric Por
Page 155 and 156:
Exhaust HosesMany Configurations to
Page 157 and 158:
Overskirt ShroudsFor Dynorbital ®
Page 159 and 160:
Accessories Intro.qxd:Layout 1 9/27
Page 161 and 162:
2006 Ind Cat_Accessories:2006 Indus
Page 163 and 164:
Page 165 and 166:
Page 167 and 168:
Page 169 and 170:
Page 171 and 172:
Page 173 and 174:
Page 175 and 176:
Page 177 and 178:
Page 179 and 180:
Page 181 and 182:
Page 183 and 184:
Page 185 and 186:
Page 187 and 188:
Page 189 and 190:
Page 191 and 192:
Page 193 and 194:
Page 195 and 196:
Page 197 and 198:
2006 Ind Cat_Accessories copy:2006
Page 199 and 200:
Page 201 and 202:
Page 203 and 204:
Page 205 and 206:
Page 207 and 208:
Page 209 and 210:
Coated Abrasive BeltsFor Use With P
Page 211 and 212:
ABRASIVES AND FILES 211Coated Abras
Page 213 and 214:
ABRASIVES AND FILES 213Non-Woven Ny
Page 215 and 216:
CoatedABRASIVES AND FILES 215NewEdg
Page 217 and 218:
ABRASIVES AND FILES 217Coated Abras
Page 219 and 220:
Dynastraight ®FlapperDynisherABRAS
Page 221 and 222:
DynaMitt SheetsCoatedABRASIVES AND
Page 223 and 224:
ABRASIVES AND FILES 223Bi-Metal Rec
Page 225 and 226:
PRODUCT & SAFETY INFORMATIONSafety
Page 227 and 228:
PRODUCT & SAFETY INFORMATIONRecomme
Page 229 and 230:
PRODUCT & SAFETY INFORMATIONMaintai
Page 231 and 232:
NUMERICAL INDEX OF TOOLS231Model Pa
Page 233 and 234:
Dynabrade ’ s Mobile Training Uni
show all

abrasive belt tools

Create successful ePaper yourself

Delete template?

Save as template?