abrasive belt tools

More documents

Recommendations

Info

2006 Ind Cat_Accessories:2006 Industrial Catalog.qxd 9/27/06 5:28 PM Page 162162ACCESSORIESDynaJet In-Line Blow GunClean Off Work Surfaces Without Disconnecting• Only connect once... permanently mounts between couplerand air hose to purge air line of water and contaminantsbefore starting up air tools.• Durable aluminum construction, weighs only 2 oz. (0.06 kg).Part Number 94466Standard Design• Provides no restriction of air line pressure.Part Number 94467Safety Tip Design• Reduces line pressure down to 30 PSIG (2 Bar).• Meets O.S.H.A. requirements of special relief hole in nozzlewhich limits pressure to 30 PSIG (2 Bar) when dead ended andused on an air line of 150 PSIG (10.3 Bar) or less.Part Number 94466 Part Number 94467Proper Installation for DynaJet In-Line Blow Gun ConnectionCoupler Blow Gun Air LinePart Thread Weight Recommended Air FlowNumber Size kg (lb.) Range SCFM (LPM)94466 1/4" Female NPT 0.06 kg up to 35 SCFM (991 LPM94467 1/4" Female NPT 0.06 kg up to 991 LPM10.3 Bar (150 PSIG) maximum on all models1/4" Male NPT 1/4" Male NPT1/4" Female NPTon both endsFilter-Regulator-LubricatorCost-Effective Solutions for Air Supply SystemsFilter• Two stage filtration of waterand contaminants from theair system.Part Number Air Inlet Thread11400 3/8" NPT11406 1/2" NPTRegulator• Features safety-lock knob for maintainingaccurate air pressure regulation.Part Number Air Inlet Thread11401 3/8" NPT11407 1/2" NPTLubricator• Adjustable oil drop to meter the amount of oilinto the air system.Part Number Air Inlet Thread11403 3/8" NPT11409 1/2" NPTAdditional Specifications: Maximum Air Flow 9.7 Bar (140 PSIG)Female Ports3/8" NPT = 40 SCFM (1,133 LPM) @ 100 PSIG (6.9 Bar)1/2" NPT = Up to 55 SCFM (1,558 LPM) @ 100 PSIG (6.9 Bar)NOTE: For installation and maintenance instructions refer toDynabrade’s Filter-Regulator-Lubricator Manual (PD00.72)Filter-Regulator• Two stage filtration of water and contaminantsfrom the air system.• Features safety-lock knob formaintaining accurate air pressureregulation.Part Number Air Inlet Thread11402 3/8" NPT11408 1/2" NPTRegulator-Lubricator• Features safety-lock knob for maintainingaccurate air pressure regulation.• Adjustable oil drop to meter the amount of oilinto the air system.Part Number Air Inlet Thread11404 3/8" NPT11410 1/2" NPTFilter-Regulator-Lubricator• Two stage filtration of water and contaminants from the air system.• Features safety-lock knob for maintaining accurateair pressure regulation.• Adjustable oil drop to meter the amount ofoil into the air system.Part Number Air Inlet Thread11405 3/8" NPT11411 1/2" NPT
2006 Ind Cat_Accessories:2006 Industrial Catalog.qxd 9/27/06 5:28 PM Page 163Dynaswivel ®Never Fight an Air Hose Again!ACCESSORIES 163Air Line ConnectorsFor use with Most Air Tools... Grinders, Sanders, Glue Guns, Staple Guns, Drills, Buffers, etc.THE PROBLEMAluminum ConstructionSingle Pivot• Right angle “single-pivot” swivels 360° at one location.• Designed to permit air hose to extend horizontallyaway from tool while allowing 360° toolmaneuverability.• Great for stationary equipment.Thread Part Flow Air Flow Range WeightSize Number Control SCFM (LPM) lb. (kg)1/4" NPT 95590** No up to 25 (708) 0.11 (0.05)3/8" NPT 95591** No 26-45 (736-1275) 0.26 (0.12)1/2" NPT 95592** No 46-65 (1303-1841) 0.46 (0.21)THE SOLUTIONAluminum ConstructionDouble Pivot• Swivels 360° AT TWO PIVOT POINTS allowingthe air hose to drop directly to the floor whileproviding superb tool handling.• The Dynaswivel ® is a “universal-joint” that connectsportable air tools to an air line.• It improves tool maneuverability, minimizes operatorfatigue and extends hose life.• Patented; works great on air tools or paint guns.Non-Marring Composite ConstructionDouble Pivot• Swivels 360° AT TWO PIVOT POINTS allowingthe air hose to drop directly to the floorwhile providing superb tool handling.Double Pivot, Flow Control• Swivels 360° AT TWO PIVOT POINTSallowing the air hose to dropdirectly to the floor whileproviding superb tool handling.• Finger-tip air-flow control dial.Double Pivot, Flow Control• Swivels 360° AT TWO PIVOT POINTS allowingthe air hose to drop directly to the floorwhile providing superb tool handling.• Finger-tip air-flow control dial.Part Thread Flow Air Flow Range WeightNumber Size Control SCFM (LPM) lb. (kg)1/8" Male x 251/4" NPT Female95852** No up to 25 (708) 0.18 (0.08)1/4" NPT95460** No up to 25 (708) 0.20 (0.09)95734** Yes up to 25 (708) 0.24 (0.11)3/8" NPT 95461** No 26-45 (736-1275) 0.40 (0.18)1/2" NPT 95462** No 46-65 (1303-1841) 0.80 (0.36)3/4" NPT 95690** No above 65 (1840) 1.50 (0.68)Dynaswivel ® Display PakModel 96177• Includes one counter top display box andten 94300 Dynaswivel ® Air Line Fittings.Thread Part Flow Air Flow Range WeightSize Number Pivot Control SCFM (LPM) oz. (kg)1/4" NPT94300* Double No up to 33 (935) 2.15 (0.06)94407* Double Yes up to 46 (1303) 2.40 (0.08)IMPORTANT: 150 PSIG (10.3 Bar) maximum on all models*NOTE: Do not exceed recommended torque value of 28-30 newton metres**NOTE: Do not use on percussion tools or in areas of high mechanical abuse
Page 2 and 3:
2 TABLE OF CONTENTSIntroductionGene
Page 4 and 5:
4 INTRODUCTIONGeneral Product Infor
Page 6 and 7:
6 INTRODUCTIONGuide to Catalog Symb
Page 8 and 9:
8“The Original ” Dynafile ®Air
Page 10 and 11:
10 ABRASIVE BELT TOOLSDynafile ®4"
Page 12 and 13:
12.4 hp Dynafile ® IIAir-Powered A
Page 14 and 15:
14 ABRASIVE BELT TOOLSDynafile ® I
Page 16 and 17:
16Mini-Dynafile ® IIAir-Powered Ab
Page 18 and 19:
18Dynafile ® IIIAir-Powered Abrasi
Page 20 and 21:
20 ABRASIVE BELT TOOLSDynafile ® I
Page 22 and 23:
22ABRASIVE BELT TOOLSDynabelter ®A
Page 24 and 25:
24 ABRASIVE BELT TOOLSDynabelter ®
Page 26 and 27:
26 ABRASIVE BELT TOOLSDynangle ® I
Page 28 and 29:
Dynastraight ® ...................
Page 30 and 31:
30ABRASIVE FINISHING TOOLSDynastrai
Page 32 and 33:
32Dynastraight ®Air-Powered Abrasi
Page 34 and 35:
34Dynastraight ®Air-Powered Abrasi
Page 36 and 37:
36 ABRASIVE FINISHING TOOLSDynaRove
Page 39 and 40:
ABRASIVE FINISHING TOOLSElectric Dy
Page 41 and 42:
ABRASIVE FINISHING TOOLSLightweight
Page 43 and 44:
Industrial DynaZipIndustrial-Qualit
Page 45 and 46:
Dynorbital-Spirit ® & Dynorbital
Page 47 and 48:
Dynorbital-Spirit ®Air-Powered Ran
Page 49 and 50:
RANDOM ORBITAL SANDERSMesh Abrasive
Page 51 and 52:
Dynorbital ®SupremeAir-Powered Ran
Page 53 and 54:
Two-Hand Dynorbital ®Air-Powered R
Page 55 and 56:
RANDOM ORBITAL SANDERS557° Offset
Page 57 and 58:
RANDOM ORBITAL SANDERS57Right Angle
Page 59 and 60:
RANDOM ORBITAL SANDERS11" Dia. Elec
Page 61 and 62:
DynaLocke ®Air-Powered Dual-Action
Page 63 and 64:
GEAR-DRIVEN AND FINISHING SANDERSGe
Page 65 and 66:
“Backsplash ” SanderAir-Powered
Page 67 and 68:
GEAR-DRIVEN AND FINISHING SANDERSDy
Page 69 and 70:
Dynabug ® Orbital SanderAir-Powere
Page 71 and 72:
Page 73 and 74:
Page 75 and 76:
Wet Dynorbital ® Supreme .........
Page 77 and 78:
Wet Dynorbital ®SupremeAir-Powered
Page 79 and 80:
WET SANDERS79Wet Dynafine ®Air-Pow
Page 81 and 82:
Dynabuffer ........................
Page 83 and 84:
BUFFERS AND POLISHERS“Two-Step
Page 85 and 86:
BUFFERS AND POLISHERS3" Diameter Bu
Page 87 and 88:
BUFFERS AND POLISHERS5"-8" Diameter
Page 89 and 90:
Straight-Line Buffer.4 hp and .7 hp
Page 91 and 92:
Pencil Grinders ...................
Page 93 and 94:
Pencil GrindersTurbine-Driven Air M
Page 95 and 96:
.33 hp Die GrinderRight Angle, Gear
Page 97 and 98:
.4 hp Die GrindersStraight-Line, Ge
Page 99 and 100:
.4 hp Die GrindersRight Angle, Fron
Page 101 and 102:
.5 hp Die GrindersStraight-Line, Ge
Page 103 and 104:
DIE GRINDERS.5 hp Die Grinders7° O
Page 105 and 106:
.7 hp Die GrindersStraight-Line, Fr
Page 107 and 108:
1 hp Die GrindersStraight-Line, Rea
Page 109 and 110:
DIE GRINDERS1 hp Extension Grinders
Page 111 and 112: 2" Dia. Disc Sanders.4 hp and .5 hp
Page 113 and 114: 3" Dia. Disc Sanders.4 hp, .55 hp a
Page 115 and 116: DISC SANDERS4-1/2" Dia. Disc Sander
Page 117 and 118: DISC SANDERS4-1/2"-5" Dia. Disc San
Page 119 and 120: Depressed Center Wheel Grinders ...
Page 121 and 122: GRINDERSDepressed Center Wheel Grin
Page 123 and 124: GRINDERSDepressed Center Wheel Grin
Page 125 and 126: GRINDERSType 1 Wheel GrindersAir-Po
Page 127 and 128: GRINDERSCut-Off Wheel ToolsAir-Powe
Page 129 and 130: GRINDERSVacuum Cut-Off Wheel ToolsA
Page 131 and 132: DrillsAir-Powered Drills, Angle Hea
Page 133 and 134: DrillsAir-Powered Drills, 3/8" Chuc
Page 135 and 136: DRILLS AND SPECIALTY TOOLSStockade
Page 137 and 138: Dynadie ® IIIAir-Powered Reciproca
Page 139 and 140: Versatility Grinders ..............
Page 141 and 142: Versatility GrinderElectric Abrasiv
Page 143 and 144: STATIONARY MACHINESVersatility Grin
Page 145 and 146: STATIONARY MACHINESVersatility Grin
Page 147 and 148: STATIONARY MACHINESElectric Tool Po
Page 149 and 150: STATIONARY MACHINESWet Deburring St
Page 151 and 152: Portable Vacuum SystemsChoose from
Page 153 and 154: DUST COLLECTION SYSTEMSElectric Por
Page 155 and 156: Exhaust HosesMany Configurations to
Page 157 and 158: Overskirt ShroudsFor Dynorbital ®
Page 159 and 160: Accessories Intro.qxd:Layout 1 9/27
Page 161: 2006 Ind Cat_Accessories:2006 Indus
Page 165 and 166: 2006 Ind Cat_Accessories:2006 Indus
Page 197 and 198: 2006 Ind Cat_Accessories copy:2006
Page 209 and 210: Coated Abrasive BeltsFor Use With P
Page 211 and 212: ABRASIVES AND FILES 211Coated Abras
Page 213 and 214:
ABRASIVES AND FILES 213Non-Woven Ny
Page 215 and 216:
CoatedABRASIVES AND FILES 215NewEdg
Page 217 and 218:
ABRASIVES AND FILES 217Coated Abras
Page 219 and 220:
Dynastraight ®FlapperDynisherABRAS
Page 221 and 222:
DynaMitt SheetsCoatedABRASIVES AND
Page 223 and 224:
ABRASIVES AND FILES 223Bi-Metal Rec
Page 225 and 226:
PRODUCT & SAFETY INFORMATIONSafety
Page 227 and 228:
PRODUCT & SAFETY INFORMATIONRecomme
Page 229 and 230:
PRODUCT & SAFETY INFORMATIONMaintai
Page 231 and 232:
NUMERICAL INDEX OF TOOLS231Model Pa
Page 233 and 234:
Dynabrade ’ s Mobile Training Uni
show all

abrasive belt tools

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?