SPRAYING BOOM ECO BDM - Bargam UK

More documents

Recommendations

Info

4HANDLINGAND LOADING4.1. TRANSPORTATION, PACKAGING AND UNPACKAGINGThe equipment can be shipped:– by road,– by train,– by ship.The equipment is fixed to a pallet through straps and protected by thermoretractablecellophane to be removed through suitable tools before carrying out the installation.4.2. LOADING AND UNLOADINGDANGER - WARNING: Lifting and handling operationsmust be carried out through suitable means and by skilledpersonnel.IDM - 05.026 Ec. 01– Use a fork lift device to be positioned as shown in figure 1.– Slowly lift and handle the equipment avoiding any impact.368.005 (F) Ec. 0- 6 -
HANDLING AND LOADING44.3. INSTALLATION OF THE DISASSEMBLED PARTSPreambleThe spraying boom is supplied partially disassembled, since the water system mustbe assembled after the boom structure has been fastened to the tractor-mountedtank.Follow the instructions below to carry out a correct installation and assembly of thespraying boom.4.3.1 Boom structure - InstallationAccording to the models (annex C), the boom structure can be directly installed onthe slider kit, on the slider kit supplied with spacer or on the balancing device(annex D).Should the boom be installed on the balancing device:– Lift the boom structure (fig. 2) and fasten it through U bolts A, without tightening it.AIDM - 05.005 Ec.0 2368.005 (F) Ec. 0- 7 -
Page 3: INDEX1 GENERAL INFORMATION1.1. PURP
Page 6 and 7: 1GENERALINFORMATION1.2. MANUFACTURE
Page 8 and 9: 2TECHNICALINFORMATION2.3. SAFETY DE
Page 12 and 13: 4HANDLINGAND LOADINGDisplace the bo
Page 14 and 15: 4HANDLINGAND LOADING- Fit nozzle bo
Page 16 and 17: 4HANDLINGAND LOADING❏ 5-section s
Page 18 and 19: 4HANDLINGAND LOADING4.4. REAR LIGHT
Page 20: 7EQUIPMENTMAINTENANCEA careful and

SPRAYING BOOM ECO BDM - Bargam UK

Create successful ePaper yourself

Delete template?

Save as template?