SPRAYING BOOM ECO BDM - Bargam UK

More documents

Recommendations

Info

4HANDLINGAND LOADING4.4. REAR LIGHTS KIT - INSTALLATION (IF FITTED)– Position the rear lights kit A as shown in fig. 13, fastening it through U bolts B.REAR LIGHT KIT FOR MOUNTED TANK UNITBAABREAR LIGHT KIT FOR TRAILED TANKAAB368.005 (F) Ec. 0BIDM - 05.025 Ec.0 13- 14 -
6USEAND OPERATION6.1. UNFOLDING AND FOLDING OF THE SPRAY <strong>BOOM</strong>For safety purposes, carry out the following operations before unfolding and foldingthe boom:– lower the tractor height adjuster;– turn off the tractor engine, engage the parking brake, remove the ignition key, takingit away;– Make sure that the locking device (if available) of the balancing device is engaged(see booklet D).❑ Spraying boom unfolding:– Disengage the boom locking A (fig. 1)AIDM - 05.016 Ec.0 1CAUTION: the spraying boom mustbe gripped in those points marked bythe relevant plate.– Remove the locking devices and unfold the boom, according to the sequence shownin figure 2 (as far as 5-section booms are concerned) and figure 3 (as far as 7-sectionbooms are concerned).45 62321314IDM - 05.011 Ec. 02IDM - 05.012 Ec. 03– Disengage the locking device (if available) of the balancing device (see booklet D).❑ Folding of the spraying boom368.005 (F) Ec. 0– Carry out the above described operations in reverse order;– fit the relevant locking devices.- 15 -
Page 3: INDEX1 GENERAL INFORMATION1.1. PURP
Page 6 and 7: 1GENERALINFORMATION1.2. MANUFACTURE
Page 8 and 9: 2TECHNICALINFORMATION2.3. SAFETY DE
Page 10 and 11: 4HANDLINGAND LOADING4.1. TRANSPORTA
Page 12 and 13: 4HANDLINGAND LOADINGDisplace the bo
Page 14 and 15: 4HANDLINGAND LOADING- Fit nozzle bo
Page 16 and 17: 4HANDLINGAND LOADING❏ 5-section s
Page 20: 7EQUIPMENTMAINTENANCEA careful and

SPRAYING BOOM ECO BDM - Bargam UK

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?