Coated Abrasives

CoatedAbrasivesPaper and Soft-Touch DiscsPreparation for UsePaper discs should be used only on machines with a suitable back-up pad. Damaged ormisshapen discs and pads should not be used. Discs and pads must not be modified in any way.Take care to fix the disc securely and centrally to the back-up pad. The diameter of the disc mustbe at least 2mm bigger than the back-up pack but no more than 4mm.Sanding OperationOnly start to sand when the machine is ‘up to speed’, except on pneumatic random orbitalmachines which must be started with light pressure on the disc. The machine should be operatedwith the disc making the smallest possible angle to the workpiece.Use only light pressure at first when grinding with quick release backed discs.Do not allow overheating of the disc to occur. After use the machine should be stored carefully.The face of the abrasive should not be in contact with the floor or work bench.PERSONAL PROTECTIONSafety goggles, ear defenders, safety gloves, dust masks and, if grinding conditions are severe,additional face protection. Leather aprons and safety shoes must be worn.PERSONAL PROTECTIONMouthProtectionWearGlovesEyeProtectionEarProtectionReadInstructionDryWet34