Coated Abrasives

AccessoriesCARTRIDGE ROLL MANDRELS – FOR ZPE/ZSPIPrecision machined from high quality steel featuring sharp course threads which hold rollssecurely in place during operation. They also have a good lead in thread allowing the rollto start easily on the mandrel.CoatedAbrasivesPilotDiameterPilot LengthShank LengthShank DiameterPilot length should be 6-12mm shorter in length than the Cartridge Roll.The Mandrel Pilot diameter should match the size of the Cartridge Roll Pilot Hole.Always insert glued end first onto Mandrel.RECOMMENDED PILOT LENGTH FOR CARTRIDGE ROLLS19mm Cartridge Roll Length25mm Cartridge Roll Length38mm Cartridge Roll Length50mm Cartridge Roll LengthUse 13mm PilotUse 19mm PilotUse 25mm PilotUse 38mm PilotMAXIMUM RPM’S3mm to 12mm dia16mm to 25mm dia25mm to 38mm dia16000-23000 maximum RPM12000-18000 maximum RPM10000-15000 maximum RPM93