11.07.2015 Views

Parker One Pneumatic

Parker One Pneumatic

Parker One Pneumatic

SHOW MORE
SHOW LESS
  • No tags were found...

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

PDE2600PNUK<strong>Parker</strong> <strong>One</strong> <strong>Pneumatic</strong>ISO 15407 - Regulators - HA & HBAccessories - Sandwich RegulatorFeatures• Remote air pilot operated for hard-to-reach pressure control.• Unregulated pilot pressure to valve for consistent valve shiftingregardless of pressure adjustment.Gauge adaptor kitIncluded with all HB Regulators. Both kits are required on all HA &HB Regulators when the Regulator is on the last station on the right(14) end.DescriptionGauge kitOrder codePS5651160PHB & HA Common Port RegulationProvides adjustable regulated air pressure to the valves #1 portwhich gives the same pressure to both the #2 and #4 port of themanifold or subbase. The regulator is always on the 14 end of thevalve.Common port regulator with4-way, 2-positionsingle solenoid valveCommon port regulator with4-way, 3-position APB valveHA - 26mm(Common Port Regulator shown)8 bar Order codePlug-inNon Plug-inSize 18mm PS5638133P PS5637133PSize 26mm PS5538133P PS5537133PHB & HA Independent Port RegulationDual Port RegulatorProvides regulated pressure to both ports. Pressure regulation canoccur out of the #2 or #4 port of the valve. In this case #2 and #4have to be cross wired.3 position CP have to be used as a COE3 position COE have to be used as a CPIndependent dual port regulator with4-way, 2-positiondouble solenoid valve184<strong>Parker</strong> Hannifin Corporation<strong>Pneumatic</strong> Division - Europe

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!