Parker One Pneumatic

PDE2600PNUKParker One PneumaticModuflex FRLsPressure SwitchInline MountingDial indicator for easy pressure setting5 amp rated snap action micro switchHeavy duty aluminium componentCompact sizeDIN 43650HCM connector includedIP65 RatedField adjustable 2 - 10 bar+/- 2% repeatabilitySingle pole / Double throw switchThe Pressure Switch monitors the air pressure in yourpneumatic system. When the pressure in your system eitherdrops below or exceeds the set point, an electrical output isgenerated.Description Order code Weight (g)G1/4 P01913 90Using a 3mm hex wrench, turn the adjusting screw on topof the unit clockwise to increase the pressure set pointand couterclockwise to decrease the pressure setting.One complete revolution of the adjusting screw covers thecomplete adjustment range (2 - 10 bar).Ground1(Common)2(Normally closed)3(Normally open)Technical InformationMaterial SpecificationElectrical:5 amp, 12/24VDC, 125/250VACDiaphragm:NitrileMaximum inlet pressure:20 barHousing:Anodised aluminiumMechanical life:10 6 at standard operating conditionsElectrical connection:DIN 43650HCMElectrical protection:IP65Repeatability:±2% at 20 O C ambientTemperature range:-40 O C to 80 O CWeight:0,06 Kg281Parker Hannifin CorporationPneumatic Division - Europe