Parker One Pneumatic

PDE2600PNUKParker One PneumaticRectusRectus Self-Venting Series 24KE - DN 5.5The connection is made the same way as with all otherquick connect coupling series, by simply pushing theplug in the coupling. The audible latching when theplug is securely in place signifi es that the coupling islocked. The sleeve must be pulled back to release thefi rst locking system before it can be disconnected. Thiscloses the coupling valve. The compressed downstreamair can now escape from the plug (hose). Pulling thesleeve back a second time releases the second lockingsystem. The connection can now be safely undone. Thisself-venting coupling, designed for bleeding off trappedair, is not suitable for direct connection to compressedair tools.Self-Venting SystemAdvantagesThe system fulfi ls the requirements of ISO 4414• increased safety standards in the work place• the plastic sleeve does not scratch working surfacesChart / AirPressure Drop (bar)Flow Rate in l/minCautionNot recommended for direct connection to compressedair tools. Reliable functioning can only be guaranteed inconjunction with original Rectus plugs made of steel.Working PressurePB = 12 bar, maximum static working pressurewith safety factor of 4 to1.Working Temperature*-20°C up to +60°C (NBR)depending on the medium.*At a temperature below -20°C and above +60°Cspecial seals are available on request.MaterialCouplingBack BodyValve BodySleeveValveSpring andLocking RingLocking BallsSealsPinsPlugBrass, Nickel PlatedBrass, Nickel PlatedThermoplasticBrassAISI 301AISI 420NBRAISI 420Steel Hardened, Nickel Pl.Coupling - Male Thread BSPTPlug - Male Thread BSPTThread Order code Box QtyA1/4” 24KEAK13MPNS_99 101/2” 24KEAK21MPNS_99 10Thread Order code Box QtyA1/4” 23SFAK13SXN 203/8” 23SFAK17SXN 20385Parker Hannifin CorporationPneumatic Division - Europe