Parker One Pneumatic

PDE2600PNUKParker One PneumaticModuflex Valve System ® - P2M - S SeriesStand-Alone Valve Modules : S seriesVery useful to control isolated cylinders, these stand-alone valves moduleare compact and easy to mount on the machines with neat electricaland pneumatic connections.As an alternative to electrical controls, valves with air pilots are alsoavailable, to be controlled by individual pneumatic signals.Valve functionsThe following page shows all valve sizes andfunctions and, for each valve size, a choiceof clip-on pneumatic connectors : tubing size,straight, elbow, ...Valve main connections- Outlets to cylinders (ports 2 and 4) on oneside.- Supply P (port 1) and exhaust E (port 3) onthe other side. At port 3, exhaust may becollected or receive a clip-on muffler.Valve mountingAll valves may be mounted either with sidescrews or with their integrated retractablebrackets.Side screw mountingOptional foot mountingThe brackets arethen retracted.Valve pilot connections1- Solenoid valve modulesEach solenoid presents an M8 connection.Lockable clip-on connectors,IP 67 protected, with LED, voltage surgeprotection and flying lead cable may beordered for therequired length.(Separate orderon next page, or Electricalsee page 28 for connectorscomplete moduleorder).2- Air pilot valve modulesThe brackets arethen extended.No connector has to beordered : each pneumaticpilot port includesits integrated swivableelbow 4 mm OD tubepush-in connector.4 mm OD tubeModules and island orderingChoice between 2 approaches :1 - Basic modules ordering :The following page shows these modulessupplied without connector, together withthe choice of clip-on connectors separatelysupplied (10 units packs). This approachgives the maximum flexibility.2 - Complete modules ordering :Page 28 shows the ordering chart formodules supplied with their pneumatic andelectrical connectors and muffler.Valve modulesize 1Valve modulesize 2230Parker Hannifin CorporationPneumatic Division - Europe