Parker One Pneumatic

PDE2600PNUKParker One PneumaticCharacteristicsPressure quoted as gauge pressureCharacteristics Symbol Unit DescriptionGeneral FeaturesTypeRodless CylinderSeriesOSP-PSystemDouble-acting, with cushioning,position sensing capabilityMountingsee drawingsAir connectionThreadedAmbient and T min°C -10 – other temperature rangesmedium temperature T max°C +80 on requestrangeWeight (Mass) kg See table belowInstallationIn any positonMediumFiltered, unlubricated compressedair (other media on request)LubricationPermanent grease lubrication(additional oil mist lubrication notrequired)Option: special slow speed greaseCylinder profileAnodized aluminiumCarrierAnodized aluminium(piston)End capsAluminium, lacqueredSealing bandsCorrosion resistant steelSealsNBR (Option: Viton®)ScrewsStainless steelCoversAnodized aluminiumGuide platePlasticMax. operating pressure* p maxbar 8* Pressure quoted as gauge pressureMaterialWeight (Mass) kgCylinder seriesWeight (Mass) kg(basic cylinder) at 0 mm stroke per 100 mm strokeOSP-P16 0.22 0.1OSP-P25 0.65 0.197OSP-P32 1.44 0.354Size ComparisonP16 P25 P32Origa OSP-P Rodless CylindersClean RoomCylinderø 16 – 32 mmRodless Cylindercertified toDIN EN ISO 14644-1OSPORIGASYSTEMPLUSStandard Versions:• double-acting with adjustable endcushioning• with magnetic piston for positionsensing• Stainless steel screwsSpecial Versions:• Slow speed lubrication• Viton® sealsSeries OSP-P..Features:• Clean room classificationISO Class 4 at v m= 0.14 m/sISO Class 5 at v m= 0.5 m/s• suitable for smooth slow speedoperation up to v min = 0.005 m/s• optional stroke length up to1200 mm (longer strokes onrequest)• Low maintenance• Compact design with equal forceand velocity in both directions• Aluminium piston with bearingrings to support high direct andcantilever loads84Parker Hannifin CorporationOriga Division - Europe