Vantage 6000 IOM - Eastech Flow Controls

More documents

Recommendations

Info

05) System SetupThe System Setup selection contains items for the basic set up of the meter such as, setting up thedisplay contrast and back light, serial communications, resetting of totalizer, etc.. Press the Menukey and then the 0 and 5 keys. The Password screen will appear. The factory default is00000000. Press the Enter key and the following list will be displayed. A description for each itemis listed beside the item. To select the desired item, press the number keys for that item.01)Display02)Data PortDisplay Settings01) Contrast02) BacklightRS-232 Comm Port01) Baud Rate02) Flow ControlThe Contrast allows up to 8 differentsettings.The Backlight allows you to turn off, turnon or have the backlight timed off toconserve battery. It also allows theadjustment of the brightness.These selections allow selectingthe baud rate and flow controlparameters.03)Display ModesDisplay Mode 01 is the onlyfunction used at this time.04)Total ResetTo Reset the totalized values to zero05)New PasswordTo Enter a new Password forsecurity.Shipped from factory as 0000000006)Summary ResetTo reset the Summary values to zero07)Sensor Option01) To select sensor power to High orNormal values. Typically strap onsensor are selected as High power.02) To select Normal or Reversed sensorpolarity. Can be used is sensors areconnected backwards withoutreconnecting.08)Meter ResetTo Reset the meter to factory defaultparameters. Unit will need to bereprogrammed to application data.09)New FirmwareDO NOT USE THIS SCREEN:Unless the latest firmware from the factory hasbeen provided.10
06) View SignalThis selection allows the viewing of the signal. The signal should be a uniform sinusoidal wave. Ifthe signal is distorted, try recycling the power or reposition the sensors. Press the Menu key andthen the 0 and 6 keys. To refresh the displayed signal press the F5 key.Components of the Vantage 6000DescriptionPart NumberHandheld electronic unit 544743-0001V30L 640 sensor (2)* 544746-0001V30S 1280 sensor (2)* 544747-0001Speedrail V-Shot 544727-0001Speedrail Z-Shot up to 12” pipe 544726-0001Speedrail Z-Shot 14” and larger pipe ** 544725-0001Sensor Clamps (2) 528360-0001Thumb Screw (2) 528304-0002AC adaptor/battery charger cable 544748-0001Serial communications cable 544749-0001External battery power cable 544750-0001Sensor cable extension 18 Ft. *** 501733-0002*May have one or both sets of sensors depending on unit ordered.**Not supplied if only V30S 1280 sensor ordered.***Optional11
Page 1: Vantage 6000Portable Ultrasonic Flo
Page 4 and 5: To select the item you want press t
Page 6 and 7: 07>Meter FactorZero Offset:01) Manu
Page 8 and 9: The other Z-Shot configuration uses

Vantage 6000 IOM - Eastech Flow Controls

Create successful ePaper yourself

Delete template?

Save as template?