Instruction Manual book - Pichler
Instruction Manual book - Pichler
Instruction Manual book - Pichler
- No tags were found...
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
EDGE 540 V3-30cc - Item code: BH94 .<strong>Instruction</strong> <strong>Manual</strong>Secure.HORIZONTAL STABILIZER.Horizontal stabilizer installationSee picture below.Top side. Draw a center line onto the horizontal stabilizer.Then put the horizontal into the fuselarge.INSTALLING THE ELEVATORSERVOS.Center line. 1. Install the rubber grommets and brasscollets into the elevator servo. Test fit theservo into the servo tray.Check to mark sure the wing and stabilizerare paralell. If they are not, lightly sandthe opening in the fuselage for the stabilizeruntil the stabilizer is paralell to the wing. 2. Mount the servo to the tray using themounting screws provided with your radiosystem.15
Change language