Mono & Multi Couplers

manual Multi Couplers2.4 Manual leak-proof multi couplers for hydraulicsseries MCCF/MH for higher pressureThe leak-proof manual multi couplers for multi connections of hydraulic linesare available with 4 or 6 mono couplers (2 or 3 circuits)These manual multi couplers are used to connect multi hydraulic circuitsin a simple and fast way without spilling fluid and without making mistakesanymore. Max. working pressure is 160 bar (2300 psi) on max 3 couplers.Max. working temperature is 120°CFitted with non-spill, flush face SPH 08 mono coupler with 8 mm (3/8”)diameter. Seals are standard of Nitril (NBR).The connections on the mould mounted part can be done on the side ofthe manifold block. Circuits are numbered on the mould and machine side.It is recommended to balance the forces in case of not using all connections.The turning handle on the machines side is removable and has two potionsin which the handle can be positioned for easier turning.A parking station, type MMCP-6 is provided to ”park” the machine side multicoupler during a mould change.Selection chart for machine side leak proof manual multi coupler for hydraulicsEAS modelnumberEquip. withqty coup.ConnectionthreadOpen orclosed coup.Dimensions in mmA A1 B B1 C DMMCFH 0408-0003 4 3/8” BSP female closed 134 151 110 47 180 232MMCFH 0408-0014 4 1/2” NPT female closed 134 151 110 47 180 232MCCFH 0408-0023 4 9/16” UN-18 female closed 134 151 110 47 180 232MCCFH 0608-0003 6 3/8” BSP female closed 134 151 110 47 180 232MCCFH 0608-0014 6 1/2” NPT female closed 134 151 110 47 180 232MCCFH 0608-0023 6 9/16” UN-18 female closed 134 151 110 47 180 232CDA1A2 bores M8-6HMCCF/mhB1BSelection chart for parking stationEAS modelnumberDimensions in mmA B C D EMMCP-6 240 40 190 112 M8MCCP-6 Parking Station56