X-Force luminaires - Thorn Lighting

StormForceA specialist range of IP65 proofluminaires suitable for exteriorenvironments that are subjectto rain and strong windsStormForce has been developed for applications that require IP65proof luminaires to perform in environments exposed to rain andstrong winds. Luminaires mounted on poles, metal gantries or flexiblestructures that may distort under high winds causing the housing totwist and deform the IP65 seal. StormForce is specifically designed fortough outdoor applications such as power stations, process plantsand coastal locations.Lamps36-70W T26 (FD) linearfluorescent. Cap: G1335-49W T16 (FDH) linearfluorescent, Cap: G5Materials/FinishCanopy: Glass-fibrereinforced polyester.Diffuser: Choice of PMMA orpolycarbonate with linear prisms.Gasket: expanded polyurethaneToggles: stainless steelGear tray: steel, whiteenamelled finishInstallation/MountingCable entry positions at theback and each end of the fitting.Supplied with IP65 grommet,stainless steel toggles are captivein the canopy to prevent lossduring maintenance, and steelgear tray is retained by fingeroperated spring latches.Accessory kits for BESA boxmounting, conduit mounting,chain suspension and catenarysuspension are all available.Through wire kits can be specifiedfor use with non-emergencyversions (see accessories listing).StandardsDesigned and manufactured tocomply with EN 60598Emergency EN60598 2.22.Class I ElectricalIK09 (PC diffuser)IK02 (PMMA diffuser)IK03 (canopy)850°C fire retardant(glow wire test)IP65SpecificationTo specify state:High performance, IP65, dustand moisture proof impactresistant luminaire with areinforced GRP canopy suitablefor exposed exterior locations,polycarbonate diffuser or acrylicdiffuser, stainless steel toggles,internal steel channel, gull wingbrackets, 36-70W T26 linearfluorescent lamps or 35-49W T16linear fluorescent lamps, HF gear.As Thorn StormForce.Key Features• Reinforced GRP Canopy• Choice of PMMA orPC diffuser• Internal steel channel• High Frequency control gear• IP65-Dust and moisture proof• Stainless steel toggles• Robust enclosure and longlife seal• Factory fitted gull wingbrackets• Emergency versions available• Dimmable versions availableon request• LSOH cable as standardStormForceDiffuserPMMAApplications• Outdoor processing plants• Seafront areas• Piers• Transport areas• Outdoor processing plants• Power stations• Exposed coastal locationsDiffuser PCCanopyGRPUV Resistance Good Fair GoodImpact Resistance 0.2Nm 10Nm 0.35NmResistance toExcellent Good ExcellentageingSilicone free Yes Yes YesHalogen free:LuminaireInternal WiringFood gradecertification(15° angle)YesYesYesYesYesn/aYes Yes YesGlow wire test 650°C 850°C 850°CHeat resistance of 95°C 125°C 160°Cluminaire plasticsUV Transmittance 91% 89% n/a26