ELECTRIC HEATING CATALOG - Agencespl.com

BACKGROUNDReznor was founded in 1888 to manufacture the“Reznor” reflector heater, which used a luminous flamegas burner developed by George Reznor. This technologicalbreakthrough was an immediate successand hastened the expansion of gas heating in residentialand commercial applications. Technologicaldevelopment and innovation have been the hallmarkof Reznor products through the years. The developmentof the forced air gas unit heater, the modularThermocore ® heat exchanger, and the high-efficiency,V3 ® Series Unit Heater with the TCORE 2® single-burnerand innovative heat exchanger system, have keptReznor products at the forefront of technological advancesin commercial and industrial gas heating. Asa result of this pioneering role in the heating, makeupair, and ventilating equipment field, the products offeredtoday are the most advanced in engineering designto satisfy a wide variety of applications.FACILITIESReznor heaters were first manufactured and sold inMercer, Pennsylvania (70 miles north of Pittsburgh)in 1888. Over the years, the company has grown andexpanded. Today, with sales worldwide, Reznor productsare being manufactured at facilities throughoutNorth America and Europe.PRODUCT SCOPEWell-equipped engineering laboratories for both productdevelopment and testing can be found at many ofthe manufacturing sites. All domestic lab sites areagency approved.Reznor Products include a complete line of heating,makeup air, air conditioning and ventilating systems,using gas, oil, hot water/steam, or electric heating orcooling sources. Reznor catalogs are designed toaid the engineer, architect or contractor in specifyingthe correct equipment for all standard and special applications.Complete data is presented on unit heaters,duct furnaces, infrared heaters, makeup air systems,pre-engineered custom-designed systems,packaged cooling equipment, energy recovery andevaporative cooling modules. Consult your localReznor Sales Representative for further assistancein specifying Reznor Equipment for your specific application.SERVICESProduct service requirements are handled throughcontractors and/or distributors, with backup from localrepresentatives and factory-based service team.Replacement parts inventories for both warranty andnon-warranty requirements are maintained at servicecenters throughout the country and at the manufacturingfacilities.®