ex-distributions

More documents

Recommendations

Info

e X L I N K E T H E R N E T / U S BeXLink 4-pole + PACooper Crouse-Hinds © 2008 - all rights reservedThe inlets and receptacles eXLink Ethernetand eXLink USB extend the proven connectorseries eXLink for hazardous areas. They canbe used for plug-in connection for industrialLAN/Ethernet and USB applications with eachother in areas with an explosion hazard. Thenormally used electrical isolation of an intrin -sically safe interface is no longer necessary.The Ex-e technology of the connectors allowsthe use of full Ethernet power without barriers.This increases the efficiency of the busarchitecture and reduces the sus ceptibilityto faults and therefore the costs.The sockets of the inlets and receptaclesdesigned with Ex-de degree of protection havethe proven CEAG contacts of shutter-like,punched and specially treated copper-berylliumband which provides a perfect electricalconnection continuously with its large numberof contact points. An Ex-d space around theplug pins provides a reliable explosion protectionduring connection and disconnection of theconnectors in zones 1, 2, 21 and 22. To rule outincorrect assignment, the inlets and receptaclesare coded according to time similar to the CEEsystem.In accordance with the requirements of acontemporary, safe and time-saving assembly,all the components are equipped with earthingcables, cable stub and pre-assembled RJ plugmale/female or USB plug male/female.With the M20 screw-in thread the nickel-platedbrass components (optionally stainless steel)can be integrated in all "enhanced safety" or"pressurised" design enclosures.Hot swapCompact designHigh degree of protection IP66 / IP68Simple assemblyFrequency range up to 100 MHz or USB 2.0Transfer rate up to 100 MBaud (Ethernet)Available for 10 BASE-T, 100 BASE-T6.24
I eXLink – Plug-in bus connection I12Cooper Crouse-Hinds © 2008 - all rights reservedInnovative connectors forEthernet systemsCombine the safety of an innovativeexplosion-protected connector systemwith the advantages of a homogeneouscommunication structure between thehost, control and process level! WitheXLink Ethernet and eXLink USByou can also use efficient, Ethernetbasedcommunication systems in thehazardous areas. This enables you touse a modern information architectureat the same time as efficiently satisfyingall criteria for explosion protection.Conventional field bus systems are designedexclusively for data communicationwith the process and productioncontrol. With Ethernet as a communicationmedium you can implement ahomogeneous infrastructure from thehost level via the control level to theprocess level. In the industrial environment,eXLink connector systemsreplace the familiar connectors of theIT office world. Therefore this systemsalso offers you the real time performanceof Ethernet networks – hot swap –in addition to high safety standards inareas with an explosion hazard.Adapt your control to the changingproduction processes. Child's play witheXLink connectors because Ethernetcomponents and explosion protectionhave a modular structure. This meansthat you can update your informationarchitecture without having to changeyour explosion-protected installationby simply changing the components intheir pressurised enclosures. You canuse conventional industrial componentsbecause the explosion-protectedconnection to your network is providedby the eXLink installed in the enclosurewhich also enables hot swapping ofyour terminating equipment withoutisolating and without hot work permit.The eXLink also put your data trans -mission on the safe side. Independentmeasurements of a well-knownlaboratory have classified the useof the eXLink 4-pole + PA up to100 MHz and with transfer rates upto 100 Mbaud according to therequirements in accordance withTIA/EIA-568-B.2 Category 5e assafe. The limit curves were droppedbelow considerably here. The eXLink4-pole + PA system can thereforebe used in Fast Ethernet ® orEthernet ® networks as well as for theimplementation of explosion-protectedUSB interfaces such as hard diskdriver.3456789Advanced technology with eXLinkavailable by now1011COOPER CROUSE-HINDS GMBH 6.2512
Page 1 and 2: 1ELECTRICAL CONNECTIVITY:QUICK INST
Page 4 and 5: I What is eXLink? IComponentsCooper
Page 6 and 7: e X L i n keXLink 4-pole/4-pole + P
Page 8 and 9: I eXLink 4-pole/4-pole + PE IOrderi
Page 10: I eXLink 4-pole ICooper Crouse-Hind
Page 13 and 14: I eXLink 4-pole + PE I12Cooper Crou
Page 23: I eXLink 4-pole/4-pole + PE I12Coop
Page 27 and 28: I eXLink USB 4-pole I12Cooper Crous
Page 29 and 30: I eXLink 7-pole/6-pole + PE I12Coop
Page 31 and 32: I eXLink Configuration Online I1For
Page 41 and 42: Y-junction-box2 x cable glandsY-Ada
Page 43 and 44: I Ex-protected connectors eXLink I1
Page 45 and 46: 12Cooper Crouse-Hinds © 2008 - all
Page 47 and 48: I Explosion protected terminal boxe
Page 49 and 50: I Explosion protected terminal boxe
Page 51 and 52: 12Cooper Crouse-Hinds © 2008 - all
Page 53 and 54: I Multi Purpose Terminal I12Cooper
Page 55 and 56: I Model ExTerm - 2R I12Cooper Crous
Page 57 and 58: I Model ExTerm I12Cooper Crouse-Hin
Page 59 and 60: I Ex-Plugs and Sockets I123Cooper C
Page 61 and 62: I 16A 4-/5-pole transf. plug II Plu
Page 63 and 64: 92I 16A 2-pole up to 50 V II 16A 3-
Page 65 and 66: I 16A 3-pole, 4-pole and 5-pole up
Page 67 and 68: I 16A 3-pole, 4-pole and 5-pole up
Page 69 and 70: I 32A 4-pole up to 690 V II 32A 5-p
Page 71 and 72: I 32A 4-pole up to 690 V II 32A 5-p
Page 73 and 74: I 32A 4-/5-pole Transformer plug II
Page 75 and 76:
I 63 A 4- and 5-pole up to 690 V I1
Page 77 and 78:
I 125A 4- and 5-pole up to 690 V I1
Page 79 and 80:
I 125A 4- and 5-pole up to 690 V I1
Page 81 and 82:
I 10A 21-pole up to 250 V I12Cooper
Page 83 and 84:
I 20A 7-pole up to 500 V I12Cooper
Page 85 and 86:
I 16A 3-, 4- and 5-pole up to 415 V
Page 87 and 88:
I Zone 2: 16A 3-pole, 4-pole and 5-
Page 89 and 90:
I Zone 2: 16A 3-pole, 4-pole and 5-
Page 91 and 92:
I Zone 2: 32A 4-pole and 5-pole up
Page 93 and 94:
I Zone 2: 32A 4-pole and 5-pole up
Page 95 and 96:
I Zone 2: 63 A 4- and 5-pole up to
Page 97 and 98:
I Zone 2: 63 A 4- and 5-pole up to
Page 99 and 100:
I Zone 2: 125A 4- and 5-pole up to
Page 101 and 102:
12Cooper Crouse-Hinds © 2008 - all
Page 103 and 104:
I Industrial use: 16A 3-pole, 4-pol
Page 105 and 106:
I Industrial use: 16A 3-pole, 4-pol
Page 107 and 108:
I Industrial use: 32A 4-pole and 5-
Page 109 and 110:
Page 111 and 112:
Page 113 and 114:
Page 115 and 116:
I Industrial use: 125A 4-pole and 5
Page 117 and 118:
12Cooper Crouse-Hinds © 2008 - all
Page 119 and 120:
I Ex-Repair- and Maintenance: 16A 3
Page 121 and 122:
Page 123 and 124:
Page 125 and 126:
Page 127 and 128:
I Repair socket distributions 40 A
Page 129 and 130:
I Ex-Portable outlet distribution:
Page 131 and 132:
I Ex-Cable reel: 16A 3- and 5-pole,
show all

ex-distributions

Create successful ePaper yourself

Delete template?

Save as template?