ex-distributions

e X L i n keXLink 7-pole / 6-pole + PEProviding flexible power supply and signal –connection there, where it is needed – evenin hazardous areas for the Zones 1and 2.Cooper Crouse-Hinds © 2008 - all rights reservedThe eXLink 7 pole / 6- pole + PE is a completesystem for connecting and disconnectingproduct electrically. Supplying from low voltageBUS signals up to 400 V AC / 16 A electricalpower the full range of connectors and receptaclesare available with moulded plastic enclosureas well as nickel-plated brass or stainless steelenclosures.A coding system following to IEC 309 systemsecures from misconnections of non-compatiblevoltage levels. Only connectors and plugs withthe same voltage level can be plugged into.The well-known and reliable bonding technique“crimp connection” for wire size of 0.75 mm 2 upto 1.5 mm 2 and optional 2.5 mm 2 is used forwire connection to the pins. Additionally ascrew-less technique “cage clamp” can be usedfor selected types. A special plug and connectorfor the use of armoured cable with armouringdiameter up to 1.5 mm is available.The Receptacle and the Inlet are equipped withmetric thread M25 x 1.5 or 3 /4’’ NPT thread toscrew directly into electrical apparatus. All metalversions can be used directly into Ex-d enclosureswithout additionally certification.All eXLink plugs, inlets, receptacle and connectorsare designed for hot swapping of apparatusin hazardous areas without disconnecting terminals,without shutting down circuits and withouta “hot work permit”!Standard IP protection IP66/IP68Permissible ambient temperatureform -55 to +70 °CUp to 400 V 16 AStainless steel or nickel plated brassenclosures for highest mechanicalprotectionMax. 7-pole (6-pole + PE) connectionsMining (EX I M2) certified6.28