14238 2000 Articulator_BW - Whip Mix

More documents

Recommendations

Info

Fig. 61Seat the maxillary cast in the face-bow registration andmake sure it is stable with no rocking. The cast will needadditional trimming if the upper frame will not close so thatthe front end of the upper frame contacts the face-bowcross bar.Fig. 62Whip Mix MOUNTING STONE is ideal for mounting castsbecause it is formulated to have a short working time, greatstacking ability and extremely low setting expansion.Lift the upper frame of the articulator and apply mountingstone to the base of the cast and the mounting plate.An inaccurate mounting will result if the bite fork flexesduring mounting.Fig. 63Close the upper frame to contact the cross bar, bringing themounting stone on the two surfaces together. Do not usetoo thick a mix of mounting stone or attempt to apply forcewhen the stone has already begun to set. Hold the upperframe in position until the mounting stone has set.Fig. 64It is not necessary that the mounting stone be smoothand all voids filled with the first mix. Many cliniciansprefer to utilize a second mix to fill the voids after thefirst mix has set.22
INDIRECT MOUNTING THE MAXILLARY CASTFig. 65Whip Mix Indirect Mounting Face-Bows combine theface-bow registration technique of the traditional“QUICKMOUNT” Face-Bow with the many advantagesof indirect mounting. The indirect mounting procedureoffers the user more access, increased stability, greaterease of use, and optimum instrument efficiency.Incorporating the indirect mounting technique does notrequire dramatic technique changes. The face-bowregistration is taken on the patient utilizing the sametechnique as with the original Whip Mix “QUICKMOUNT”Face-Bow. Once the registration is obtained, the TransferAssembly is removed from the face-bow and positionedonto the lower frame of the articulator.Fig. 66All Whip Mix “QUICKMOUNT” Face-Bows can be modifiedto have indirect mounting capability.The conversion package includes:1 – Transfer Base Assembly1 – Cross Bar1 – Transfer AssemblyI. Preparing the Face-Bow and Articulatorfor Mounting CastsFig. 67Unscrew the #8604 Locking Screw on the cross bar torelease the transfer assembly which holds the biteregistration from the face-bow.23
Page 1 and 2: 2000 SeriesArticulatorandQuickMount
Page 3 and 4: CONTENTSINTRODUCTION 5OBTAINING FAC
Page 5 and 6: INTRODUCTIONThe WHIP MIX Articulato
Page 7 and 8: Fig. 5Loosen the #8604 thumb screw
Page 9 and 10: III. Positioning Face-Bow on the Pa
Page 11 and 12: Fig. 21To prevent torquing of the f
Page 13 and 14: Centric Relation RecordFig. 27Many
Page 15 and 16: Lateral Interocclusal RecordsFig. 3
Page 17 and 18: Fig. 41Loosen the #8511 incisal gui
Page 19 and 20: II. Placing a Direct Mounting Face-
Page 21: Fig. 57Engage the centric latch for
Page 25 and 26: Fig. 72Raise the face-bow fork supp
Page 27 and 28: Fig 80If using the Model 2340 Artic
Page 29 and 30: Fig. 87Prepare a second mix to fill
Page 31 and 32: Fig. 93If using the Model 2340 Arti
Page 33 and 34: Fig. 101If using the Model 2340 Art
Page 35 and 36: SETTING THE CONDYLAR GUIDANCE OF TH
Page 37 and 38: Fig. 113Lubricate the rounded end o
Page 39 and 40: Fig. 120Move through all intermedia
Page 41 and 42: III. Preparing Face-Bow Armamentari
Page 43 and 44: VI. Preparing the Articulator forMo
Page 45 and 46: VIII. Mounting the Mandibular CastF
Page 47 and 48: Fig. 150Set condylar inclinations o
Page 49 and 50: WHIP MIX RECORDING SYSTEMSFig. 157F
Page 51 and 52: INTERCHANGEABILITY WITH THE MODEL 2
Page 53 and 54: MAINTENANCEThe Whip Mix Articulator
Page 55 and 56: 21201615181719222314131224911MODEL
Page 57 and 58: MODEL 9600FACE-BOWFOR DIRECT MOUNTI
Page 59 and 60: MODELS 9275/9285/9295FACE-BOWSFOR I
Page 61: For additional information, contact

14238 2000 Articulator_BW - Whip Mix

Create successful ePaper yourself

Delete template?

Save as template?