14238 2000 Articulator_BW - Whip Mix

Fig. 138The QUICKMOUNT transfer base has been placed ontothe lower member of the articulator and is held in positionby the QUICKMOUNT cast support. The transfer assemblyis inserted into the transfer base and the clamp issecurely tightened.Fig. 139The QUICKMOUNT cast support is adjusted until it lightlymakes contact with the bottom of the bite fork.Fig. 140The cast is placed into the occlusion rim, which is thenseated into the registration on the bite fork. The assemblyis now completed and ready for the addition of Whip MixMOUNTING STONE.Fig. 141The completed mounted maxillary cast. The transferassembly and transfer base may be removed and theincisal guide pin replaced.44