Safety and Environment Induction Handbook 2012 - Fremantle Ports
Safety and Environment Induction Handbook 2012 - Fremantle Ports
Safety and Environment Induction Handbook 2012 - Fremantle Ports
- No tags were found...
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>Fremantle</strong> <strong>Ports</strong> - <strong>Safety</strong> <strong>and</strong> <strong>Environment</strong> <strong>Induction</strong> H<strong>and</strong>bookWorking at heights1. Know which jobs require fall protection <strong>and</strong>fall prevention controls:• Use of PFDs when working over water• Elevated work platforms <strong>and</strong> scaffolding• Harnesses <strong>and</strong> other fall protection systems• Ladders2. Check all your equipment is OK <strong>and</strong> correctlyfitted before you start working at height3. Use the equipment correctly – If in doubt askyour SupervisorIsolation1. Identify <strong>and</strong> recognise power sources2. Never work on live power sources:• Electrical• Hydraulic• Pneumatic• Other stored energy3. Ensure staff are competent in isolation procedures:• Know which tasks require isolation• only authorised personnel to work on powersources4. Ensure all isolation procedures are adhered to5. Permit to work protocols must always be followedVessel Operations1. Ensure that pre-operational safety inspections arecompleted prior to commencing work:• Ensure safe access to / from ship <strong>and</strong> work places• Always identify a safety zone2. Keep clear of mooring lines under tension3. PFDs <strong>and</strong> other safety equipment is wornwhen mooring4. Lifting equipment is fit for purpose <strong>and</strong> safefor use5. Always position yourself safely - never work undersuspended load - never work near an open hatchor unprotected edge6. Be aware of changing work environments:• design of vessel• types guarding• weather conditions• lighting19
Change language