Features of the Jergens Zero Point Mounting System - Jergens Inc.
Features of the Jergens Zero Point Mounting System - Jergens Inc.
Features of the Jergens Zero Point Mounting System - Jergens Inc.
- No tags were found...
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
ZERO POINT MOUNTING SYSTEMWORKHOLDING SOLUTIONS GROUPClamping and PositioningOn each fixture use:• 1 – <strong>Zero</strong> <strong>Point</strong> Pull Stud• 1 – Timing Pull Stud• The <strong>Zero</strong> <strong>Point</strong> and Timing Studshould be perpendicular• Use any combination <strong>of</strong> clearanceand/or protection Pull StudZERO POINT PULL STUDCLEARANCE PULL STUDFOR HOLD DOWNQUICK CHANGE FIXTURING » ZERO POINT MOUNTING SYSTEMDimensions for machining pull stud mountingsCLEARANCE PULL STUDFOR HOLD DOWNTIMING PULL STUDSize ØD1 ØM S1 S2K5 10 M6 2.5 12K10 15 M8 3.5 16K20 25 M12 5.5 23K40 25 M16 5.5 30Note:• Pull Stud with internal thread for clamping from above• Pull Studs with different diameter D1, preventing interchange <strong>of</strong> <strong>the</strong><strong>Zero</strong> <strong>Point</strong>, timing and clearance Pull Stud during installation.• Pull Stud for series production, (notch type), Floating Pull Stud forcompensation <strong>of</strong> <strong>the</strong>rmal expansion• Automatic lifting <strong>of</strong> <strong>the</strong> pallet / fixtureFigure:Shown with Pull Stud and engagement screw42<strong>Jergens</strong>, <strong>Inc</strong>. | 15700 S. Waterloo Road | Cleveland, Ohio 44110-3898 USA
Change language