1.0 - SATA-IO

Tektronix, Inc.3000-5000 MHz 1 dBPossible Problems:1. First incident step needs to be windowed out, otherwise the measurement will not be accurate. Thecorrect acquisition window settings are shown in Figure 2.2.2. When the transmitter does not support “disconnect” operation the test setup described in the AppendixD can be used.3. Some PUTs showed significant oscillations at the termination level of the TDR response due tointeractions with Tx pattern, they can be reduced by changing the internal clock of the TDR from200kHz to 100kHz.SATA Rx/Tx MOI Revision 1.1 ver 1.019