Insist On The Real Deal! - Zodiac

S&S® CARBURETOR REPLACEMENT JETSFor those who need to rejet their carburetor because of enginemodifications, exhaust modifications, or changes in altitude,we have extra jet kits available which are designed to covermost jetting situations. Compare your jets with those in the picturesto determine the proper jet series. The description given tells whatcarburetors it fits and the sizes available. Also listed are the variousgroups of sizes offered and their respective part numbers.INTERMEDIATE JETS – SERIES #94Intermediate JetsSeries #94Series #94 fits all Super 17⁄8”, 21⁄16”, 2¼” gas carburetors.Sizes available: .025”, .0265”, .028”, .0295”, .031”, .032”,.033”, .036”, .040”.RIDERSIf you are not sure which size jets your engine needs, consult your local S&S Dealerfor the recommended jetting range for your particular carburetor and engine size.Note that the jetting chart lists the jet series numbers and the typical range of sizesfor the main jet, intermediate jet, and intermediate air bleed (if applicable). The chartalso recommends part numbers of the jet kits to order. Also observe that somejetting recommendations are similar and that jet sizes may overlap from one enginecombination to another. It may be a good idea to purchase an adjacent combinationif it fulfills your present requirements and some future engine modification youmay be contemplating. If you already know which jet sizes you need, purchase therequired jets from your local S&S dealer, or refer to the specific jet type picture anddescription and purchase the kit that contains the sizes desired.NOTE:No returns or exchanges on jets.MAIN JETS – SERIES #72Main JetsSeries #72Series #72 fits all Late Style GAL, GBL, MGAL, MGLcarburetors, all Super 17⁄8”, 21⁄16”, 2¼” gas carbs and allTWO-THROAT carburetors– sizes available: .040” to .110”(in increments of .002”), .115”, .120” and blank. (Note:Blank is drilled with a .040” hole).Sold in packages of 3 to 6 jets.1 each .062”, .064”, .066”, .068”, .070”, .072” ........11-72001 each .066”, .068”, .070”, .072”, .074”, .076” ........11-72011 each .072”, .074”, .076”, .078”, .080”, .082” ........11-72021 each .078”, .080”, .082”, .084”, .086”, .088” ........11-72031 each .090”, .092”, .094”, .096”, .098”. .............11-72041 each .100”, .102”, .104”, .106”, .108”. .............11-72051 each .110”, .115”, .120”. ........................11-72062 each .040”, .042”. ..............................11-72072 each .044”, .046”, .048”. ........................11-72082 each .050”, .052”, .054”. ........................11-72092 each .056”, .058”, .060”. ........................11-72102 each .062”, .064”, .066”. ........................11-72115 each blank ...................................11-7258JET PACKSSold in packages of 3 jets.1 each .025”, .0265”, .028”. ..................11-71001 each .0265”, .028”, .0295”. .................11-71011 each .028”, .0295”, .031”. ..................11-71021 each .0295”, .031”, .032”. ..................11-71031 each .031”, .032”, .033”. ...................11-71041 each .032”,.033”, .036”. ....................11-71051 each .033”, .036”, .040”. ...................11-71063 each .025” ...............................11-71073 each .0265”. .............................11-71083 each .028” ...............................11-71093 each .0295”. .............................11-71103 each .031” ...............................11-71113 each .032” ...............................11-71123 each .033” ...............................11-71133 each .036” ...............................11-71143 each .040” ...............................11-71153 each blanks .............................11-7116LOW RANGE JET PACKFor jetting most stock and moderate performance engines.Includes one each intermediate jets (.025”, .0265”, .028”, .0295”) oneeach main jets (.062”, .064”, .066”, .068”, .070”, .072”, .074”).. .....11-7270HIGH RANGE JET PACKFor jetting some stock and all performance engines.Includes one each intermediate jets (.0295”, .031”, .032”, .033”) andone each main jets (.072”, .074”, .076”, .078”, .080”, .082”, .084”). . 11-7271MASTER JET PACKFor jetting all Super B, E, and G equipped engines.Includes one each intermediate jets (.025”, .0265”, .028”, .0295”, .031”,.032”, .033”) and one each main jets (.062”, .064”, .066”, .068”, .070”, .072”,.074”, .076”, .078”, .080”, .082”, .084”). . ..........................11-727246 Carburetor JetsEmail us at sscust@sscycle.com