HP LaserJet M1005 MFP

More documents

Recommendations

Info

General guidelines Some media might meet all of the guidelines in this manual and still not produce satisfactory results. This problem might be the result of improper handling, unacceptable temperature and humidity levels, or other variables over which Hewlett-Packard has no control. Before purchasing large quantities of print media, always test a sample and make sure that the print media meets the requirements specified in this user guide and in the HP LaserJet Printer Family Print Media Guide, which you can view on the Web at www.hp.com/support/ljpaperguide. For ordering information, see Accessories and ordering information on page 101. CAUTION: Using media that does not meet HP specifications can cause problems for the device, requiring repair. This repair is not covered by the Hewlett-Packard warranty or service agreements. The device accepts a variety of media, such as cut-sheet paper (including up to 100% recycled-fibercontent paper), envelopes, labels, transparencies, LaserJet glossy paper, HP LaserJet Tough paper, and custom-size paper. Properties such as weight, composition, grain, and moisture content are important factors that affect performance and output quality. Media that does not meet the guidelines outlined in this manual can cause the following problems: ● Poor print quality ● Increased jams ● Premature wear on the device, requiring repair Choosing paper and other media HP media Properties such as weight, grain, and moisture content are important factors that affect performance and quality. To achieve the best possible print quality, only use high-quality media that is designed for laser printers. See Guidelines for using media on page 16 for detailed paper and media specifications. NOTE: Always test a sample of the media before you purchase large quantities. Your media supplier should understand the requirements specified in the HP LaserJet Printer Family Print Media Guide (HP part number 5963-7863). See Guidelines for using media on page 16 for more information. HP recommends that you use HP LaserJet media in the device. Media to avoid The device can handle many types of media. Using media that is outside the specifications degrades print quality and increases the chance of jams occurring. ● Do not use media that is too rough. ● Do not use media that contains cutouts or perforations other than standard 3-hole punched paper. ● Do not use multipart forms. ● Do not use paper that contains a watermark if you are printing solid patterns. 14 Chapter 3 Media specifications ENWW
Media that can damage the device In rare circumstances media can damage the device. Avoid the following types of media to prevent possible damage: ● Do not use media with staples attached. ● Do not use transparencies designed for inkjet printers or other low-temperature printers. Use only transparencies that are specified for use with HP LaserJet printers. ● Do not use photo paper intended for inkjet printers. ● Do not use paper that is embossed or coated and is not designed for the temperature of the imagefuser. Select media that can tolerate temperatures of 200°C (392°F) for 0.1 second. HP manufactures a media that is designed for the device. ● Do not use letterhead paper that was produced with low-temperature dyes or thermography. Preprinted forms or letterhead must use inks that can tolerate temperatures of 200°C (392°F) for 0.1 second. ● Do not use any media that produces emissions, or that melts, offsets, or discolors when exposed to 200°C (392°F) for 0.1 second. To order HP LaserJet printing supplies, go to www.hp.com/go/ljsupplies in the U.S. or to www.hp.com/ ghp/buyonline.html/ worldwide. ENWW Choosing paper and other media 15
Page 1: HP LaserJet M1005 MFP User Guide
Page 4 and 5: Copyright and License © 2007 Copyr
Page 6 and 7: Transparencies ....................
Page 8 and 9: Replacing and recycling supplies ..
Page 10 and 11: Country-/region-specific safety sta
Page 12 and 13: Device features Print ● Prints le
Page 14 and 15: Control panel 1 2 3 4 9 8 5 6 7 1 C
Page 16 and 17: Minimum system requirements In orde
Page 18 and 19: Printer driver The device comes wit
Page 20 and 21: Software for Windows See the gettin
Page 22 and 23: 12 Chapter 2 Software ENWW
Page 26 and 27: Guidelines for using media Paper Th
Page 28 and 29: Envelopes HP recommends that you pr
Page 30 and 31: Letterhead and preprinted forms Let
Page 32 and 33: Printing and storage environment Id
Page 34 and 35: Loading media The following section
Page 36 and 37: Controlling print jobs This section
Page 38 and 39: To change the default media type 1.
Page 40 and 41: Using features in the Windows print
Page 42 and 43: Setting a custom paper size from th
Page 44 and 45: 5. Without changing the orientation
Page 46 and 47: Printing a cover page (Macintosh) I
Page 48 and 49: 6. Maintaining the same orientation
Page 50 and 51: Canceling a print job If a print jo
Page 52 and 53: Starting a copy job To make copies
Page 54 and 55: Adjusting the lighter/darker (contr
Page 56 and 57: NOTE: If you select Custom: 25-400%
Page 58 and 59: Copying onto media of different typ
Page 60 and 61: Copying two-sided documents Copying
Page 62 and 63: Copying photos and books To copy a
Page 64 and 65: 54 Chapter 6 Copy ENWW
Page 66 and 67: Understanding scanning methods You
Page 68 and 69: Scanning by using other software Th
Page 70 and 71: 2. Gently close the lid. 3. Gently
Page 72 and 73: Resolution and color guidelines Res
Page 74 and 75:
Information pages Information pages
Page 76 and 77:
HP fraud hotline Call the HP fraud
Page 78 and 79:
2. Clean the white document lid bac
Page 80 and 81:
4. Insert the cartridge into the de
Page 82 and 83:
Problem-solving checklist Step numb
Page 84 and 85:
Clearing jams This section contains
Page 86 and 87:
Input trays CAUTION: Do not use sha
Page 88 and 89:
Output bin CAUTION: Do not use shar
Page 90 and 91:
Control-panel messages The majority
Page 92 and 93:
Control panel message Description R
Page 94 and 95:
Identifying and correcting print de
Page 96 and 97:
Problem Cause Solution Toner smears
Page 98 and 99:
Problem Cause Solution Toner appear
Page 100 and 101:
Problem Cause Solution The device d
Page 102 and 103:
Problem Cause Solution Black dots o
Page 104 and 105:
Performance problems Problem Cause
Page 106 and 107:
Scan-quality problems Preventing pr
Page 108 and 109:
Solving common Macintosh problems P
Page 110 and 111:
Problem-solving tools The section d
Page 112 and 113:
Supplies Product name Description P
Page 114 and 115:
104 Appendix A Accessories and orde
Page 116 and 117:
Hewlett-Packard limited warranty st
Page 118 and 119:
Availability of support and service
Page 120 and 121:
Guidelines for repacking the device
Page 122 and 123:
Physical specifications Table C-1 P
Page 124 and 125:
114 Appendix C Device specification
Page 126 and 127:
FCC compliance This equipment has b
Page 128 and 129:
HP LaserJet printing supplies It's
Page 130 and 131:
Declaration of conformity Declarati
Page 132 and 133:
Finnish laser statement LASERTURVAL
Page 134 and 135:
USB Universal serial bus (USB) is a
Page 136 and 137:
declaration of conformity 120 defau
Page 138 and 139:
parts, user-replaceable 102 phone n
Page 140:
lines, copies 91 lines, printed pag
show all

HP LaserJet M1005 MFP

Create successful ePaper yourself

Delete template?

Save as template?