Strata CTX DKT3001/2001-SLT User Guide - Sierra Telephone

Advanced OperationPagingClass of Service OverrideBy dialing a Class of Service Override code, a user can change a station’s set ofprivileges to one associated with the override code. When the call is terminated andanother is attempted from the same station, the original Class of Service is applied.This allows selected users to override restrictions that are placed on any telephone inthe system.➤ To perform Class of Service Override1. Access an outside line. You hear dial tone.2. Press )ODVK + . Dial tone stops.3. Enter the Class of Service Override Code (four digits). You hear dial tone. Forsecurity reasons, the override codes are only available on a selected basis. See yourCTX System Administrator.4. Dial a telephone number.Privacy OverrideThis feature enables you to enter an established call on a line you share with anothertelephone. Up to two station users can enter an existing CO line-to-station call (i.e., upto three stations can be connected to a CO line). You can also use this feature if thestation that is already connected to the CO line is in the Privacy Release mode.Station users with 3ULYDF\5HOHDVH can allow stations with the shared buttonappearance to enter their conversations, even if the station entering the conversation isnot programmed for Privacy Override. (see “Privacy” on page 35.)PagingStation users can make page announcements to telephones and external speakers.Check with your CTX System Administrator to find out the zone numbers for variouspaging groups.➤ To make a Page Announcement to a phones or external speakers1. Dial a paging access code.2. Make your announcement, then hang up.Strata CTX DKT3001/2001 Digital Single Line Telephone 01/02 33