You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
5. RAILFLEX SYSTEM II &<br />
RAILFLEX LITE<br />
HEAD<br />
RAILFLEX BASE II<br />
RFD 14<br />
RFD 14 DEMO<br />
RFD 12<br />
RFD 11 DEMO<br />
RF 1 1<br />
ONE RF 9<br />
TYROLIA<br />
RAILFLEX BASE II<br />
RFD 12<br />
RFD 1 1<br />
RF 10<br />
RAILFLEX SYSTEM II - SPEEDRAIL<br />
All RAILFLEX System II bindings are equipped with the<br />
SPEEDRAIL band. With this band it is possible to adjust the<br />
binding to the boot sole length directly on the ski, and do so<br />
without any screws. You can use this system also for<br />
DEMO purposes, but for on snow demos we still recommend<br />
the RAILFLEX DEMO bindings.<br />
The SPEEDRAIL band is for boot sole lengths from 260-<br />
360 mm. For longer boot soles we still offer the longer<br />
RAILFLEX band as a spare part. This band is for boot soles<br />
from 290-390 mm, but doesn’t offer the feature BOOT<br />
CENTER ADJUSTMENT (+15 / 0/ -15).<br />
RAILFLEX LITE SYSTEM<br />
HEAD/TYROLIA offers two versions of the RAILFLEX LITE<br />
band. The appropriate band is delivered with the integrated<br />
HEAD ski or the RAILFLEX LITE base.<br />
Band version<br />
short long<br />
Spare part number 162757 162758<br />
Ski length<br />
(Recommendation)<br />
RAILFLEX LITE<br />
RFL 7.5<br />
RFL 4.5<br />
RAILFLEX LITE<br />
RFL 9<br />
RFL 4.5<br />
under<br />
127cm<br />
127cm<br />
and longer<br />
Boot sole length 220-300 mm 240-325 mm<br />
Mondo size ~ 17.0-25.5 ~ 19.5-27.5<br />
NOTE: For skis under 140 cm we are offering the<br />
RAILFLEX LITE BASE with short screws (penetration<br />
depth: 6 mm) and for skis of 140 cm and longer with<br />
long screws (penetration depth: 8 mm). Choose the<br />
right screw length according to the ski length (see<br />
screw chart on page 60-61).<br />
HEAD/TYROLIA offers different types of brakes for<br />
RAILFLEX bindings. Refer to the brake overview on<br />
page 56-59 for brake and binding compatibility.<br />
5.1 MOUNTING - BASES<br />
The mounting of both RAILFLEX Base and RAILFLEX LITE<br />
Base is similar to the plates. Just select the right mounting<br />
mark and the appropriate bushings - black for RAILFLEX<br />
LITE and white for RAILFLEX. For more details see page 25.<br />
RAILFLEX BASE<br />
Place the front section of the RAILFLEX Base over the<br />
holes and tighten the screws. Then place the rear section<br />
over the holes and tighten the screws as well (pict 29).<br />
pict 29<br />
Finally cover the RAILFLEX BASE with the appropriate<br />
covers (pict 30).<br />
pict 30<br />
RAILFLEX LITE BASE<br />
Place the front section of the RAILFLEX LITE Base over<br />
the holes and tighten the screws. Repeat the same procedure<br />
with the rear section of the base (pict 31).<br />
pict 3 1<br />
5.2 MOUNTING - BINDINGS<br />
RAILFLEX SYSTEM II - SPEEDRAIL<br />
Make sure that the boot is satisfying the international<br />
standards and has no functional damage. Take the binding<br />
parts out of the box and follow the steps on the instruction<br />
leaflet. Determine the boot sole length with the HEAD/<br />
TYROLIA rental caliper (art. no. 162 61 7).<br />
pict 32<br />
MOUNTING / 31