Process Valve & Actuator Product Guide - Flowserve

Process Valve & Actuator Product Guide

Process Product RangeArgusFocusing on the manufacture of high specification valves from Ettlingen, Germany, Argus havedeveloped a strong brand name and reputation for high quality and performance within thechemical, petrochemical and oil & gas industries.Noble AlloyCombining material technology with high pressure ratings Noble Alloy design and manufactureproducts to meet the highest demands within the ball valve industry. From Cookeville, USA, theyfocus on ball valve design as well as producing other pipeline equipment.AtomacSpecialising in the design and manufacture of lined equipment, Atomac have developed a broadportfolio of products from their headquarters in Ahaus, Germany. Now recognised as a qualityleader in the supply of this specialised equipment they have a reputation for satisfying and solvingcustomer applications.NorbroAs the recognised brand leader in rack and pinion actuators Norbro have a reputation for highquality and reliability world wide. From their manufacturing facility in West Sussex, UK, theyproduce and distribute the Norbro range for a variety of quarter turn applications.AutomaxFrom their manufacturing facilities in West Sussex, UK, and Ettlingen, Germany, Automax offer abroad range of rack and pinion and Scotch yoke actuators. They also produce ancillary equipmentsuch as switch boxes, mounting kits and gear overrides to satisfy all actuation requirements.Serck AudcoSerck Audco have a strong history within the quarter turn industry with the supply of rubber linedbutterfly valves to lubricated plug valves. From their manufacturing and distribution centre inHaywards Heath, UK, they supply a broad range of valves to many industry sectors.DurcoWith a history of manufacturing valves in a wide range of specialised alloys Durco have focusedon meeting the high demands of the Chemical and Petrochemical industry. Strong engineering,metallurgy and research have produced a broad range of products manufactured from theirspecialised manufacturing facility in Cookeville, USA.Worcester ControlsWorcester Controls have been manufacturing valves from their facility in Burgess Hill in the UK forover 40 years. As the brand leader in ball valves they have focused on producing quality productsto comply with all international standards.McCannaFrom the Cookeville manufacturing facility in the USA, McCanna produce a range of top entry ballvalves for severe service applications within the chemical and petrochemical industry.2 3

3-Piece Ball ValvesManufacturerWorcesterWorcester Worcester WorcesterWorcester Worcester Worcester Worcester WorcesterWorcesterProductType13/14A44/59A459/599AW44/59C44/59E44/59F44/59WK44/70/743HP44/5HP44V44/459DesignDiverterStandardStandardSteamCryogenicEnviro-SafeFiresafeHigh PurityHigh PressureControlSize Range8-50mmReduced Bore15-40mmFull Bore8-50mm A44Reduced Bore15-40mm A59Full Bore65-150mm A459Reduced bore50mm-100mm A599Full Bore8-50mm AW44Reduced Bore15-40mm AW59Full Bore8-50mm C44Reduced Bore15-40mm C59Full Bore8-50mm E44Reduced Bore15-40mm E59Full Bore8-50mm F44Reduced Bore15-40mm F59Full Bore8-50mm WK44Reduced Bore15-50mm WK70True Bore8-50mmReduced Bore8-80mmReduced BorePressure Rating69 bar T seats102 bar R seats55 bar max. upstreamsealing on AT/ST69 bar T seats102 bar R seats207 bar Y seats**Group II liquids only50 bar21 bar saturated steam90 bar non steam69 bar69 bar T seats102 bar R seats69 bar T seats102 bar R seats69 bar345 barBased upon seat and valve typeEnd ConnectionsScrewedButt WeldSocket WeldScrewedButt WeldSocket WeldSpecialsScrewedButt WeldSocket WeldScrewedButt WeldSocket WeldScrewedButt WeldSocket WeldScrewedButt WeldSocket WeldScrewedButt WeldSocket WeldButt weldTri clampRTJ ISS IDFScrewedButt WeldSocket WeldScrewedButt WeldSocket WeldBody MaterialsStainless SteelCarbon SteelStainless SteelCarbon SteelBrassExoticsStainless SteelCarbon Steel(Note - Carbon steel valvesuitable for use at -46ºC asstandard)Stainless SteelCarbon SteelStainless SteelBrassStainless SteelCarbon SteelStainless SteelCarbon SteelStainless SteelStainless SteelCarbon SteelStainless SteelCarbon SteelSeat MaterialsVirgin PTFEFilled PTFEFluorofillDelrinVirgin PTFEFilled PTFEFluorofillDelrinPEEKMetalVirgin PTFEFilled PTFEFluorofillDelrinPEEKMetalFluorofillPEEKMetalFluorofillVirgin PTFEFilled PTFEFluorofillDelrinPEEKMetalVirgin PTFEFilled PTFEFluorofillVirgin PTFEFilled PTFEFluorofillDelrinPEEKStainless SteelHastelloyMonelApplication &OptionsCan be used for divertingflow or by fitting upstreamsealing seats, mixing oftwo discrete media canbe achieved. Mid strokeisolation available with180º 14 series. Bottomentry as standard withside entry availableReduced and full borevalve which has beenadopted as the industrystandard. It can be usedon an extensive variety ofapplications with manyspecial build optionsavailableThe A459/599 valveextends the size range ofthe A44/59 product up to150mmDesigned for on/off steamapplications up to 21 baron saturated steam. Thevalve is also ideal forthermal fluid applicationsup to 280ºC depending onseat materialDesigned for use oncryogenic medias such asOxygen, Nitrogen, Argon,Natural Gas and CarbonDioxide. All valves aresupplied cleaned forOxygen serviceThe Enviro-Safe valve featuresa unique dual stem sealingarrangement which ensures highintegrity combined with long life.Ideally suited for toxic mediasuch as phosgene, chlorineand high cycling applicationsSuitable for hazardous areas inhydrocarbon and chemical lines.The F44 is anti-static and firetested to EN 10497Designed for high purityapplications. Electro-polished asstandard with 0.1µm optionavailable. Cavity filler seats alsoavailable to minimise mediabuild up and purge ports forCIP and SIP can also beaccommodatedThe 5HP44 can be used forgroup II media liquids up to 345bar. High pressure gas up to 207bar can be accommodated usinga 3HP44The Worcester V seat can befitted into most versions of the44/459 to provide control on awide range of applications4 5

Flanged Ball ValvesManufacturerWorcesterWorcester Worcester WorcesterWorcester Worcester Worcester Worcester Argus Argus ArgusProductTypeB18/19F519/529F51/52E51/52F53/54F55F819/829V51/52EK71FK75MFK76MDesignMulti-WayANSIANSI ReducedEnviro-SafeDIN ReducedANSI ReducedANSI FullControlFloating BallPad MountedTrunnion MountedSize Range15-150mmB18 - Full Bore20-200mm18 - Reduced Bore15-40mmFull Bore50mmReduced Bore80-200mmReduced Bore15-200mmReduced Bore15-250mmReduced Bore65-200mmReduced Bore50-200mmFull Bore15-100mm15-50 mmFull & Reduced Bore80-200 mmFull & Reduced Bore80-600 mmFull & Reduced BorePressure Rating19 bar (Class 150)50 bar (Class 300)16 bar (PN16)40 bar (PN40)19 bar (Class 150)50 bar (Class 300)16 bar (PN16)40 bar (PN40)19 bar (Class 150)50 bar (Class 300)16 bar (PN16)40 bar (PN40)19 bar (Class 150)50 bar (Class 300)16 bar (PN16)40 bar (PN40)10 bar16 bar25 bar40 bar19 bar19 bar (Class 150)50 bar (Class 300)16 bar (PN16)40 bar (PN40)19 bar (Class 150)50 bar (Class 300)16 bar (PN16)40 bar (PN40)19 bar (Class 150)50 bar (Class 300)100 bar (Class 600)150 bar (Class 900)250 bar (Class 1500)19 bar (Class 150)50 bar (Class 300)19 bar (Class 150)50 bar (Class 300)100 bar (Class 600)End ConnectionsANSI Class 150ANSI Class 300Metric PN16Metric PN40ANSI Class 150 (519)ANSI Class 300 (529)Metric PN16Metric PN40ANSI Class 150 (51)ANSI Class 300 (52)Metric PN16Metric PN40ANSI Class 150 (E51)ANSI Class 300 (E52)Metric PN16Metric PN40Metric PN10Metric PN16Metric PN25Metric PN40ANSI Class 150ANSI Class 150ANSI Class 300Metric PN16Metric PN40ANSI Class 150ANSI Class 300Metric PN16Metric PN40Metric DIN PN RatingANSI Class RatingMetric DIN PN RatingANSI Class RatingMetric DIN PN RatingANSI Class RatingBody MaterialsStainless SteelCarbon SteelExoticsStainless SteelCarbon SteelExoticsStainless SteelCarbon SteelExoticsStainless SteelCarbon Steel(Note - Carbon steelvalve suitable for use at-46ºC as standard)Stainless SteelCarbon SteelStainless SteelCarbon SteelStainless SteelCarbon SteelStainless SteelCarbon SteelCarbon Steel (Forged)Stainless Steel(Forged & Cast)Carbon Steel(Forged & Cast)DuplexSpecial MaterialsStainless Steel(Forged & Cast)Carbon Steel(Forged & Cast)DuplexSpecial MaterialsSeat MaterialsVirgin PTFEFilled PTFEFluorofillVirgin PTFEFilled PTFEFluorofillPEEKVirgin PTFEFilled PTFEFluorofillPEEKVirgin PTFEFilled PTFEFluorofillPEEKVirgin PTFEFilled PTFEFluorofillPEEKVirgin PTFEFilled PTFEFluorofillPEEKVirgin PTFEFilled PTFEFluorofillPEEKStainless SteelHastelloyMonelPTFEPOMPTFEPOMLyton (PEEK)Arguloy (Metal Seated)PTFEPOMLyton (PEEK)Arguloy (Metal Seated)Application &OptionsAllows media diversionthrough a number of flowpaths with up to 5 flangeconnections. Flangeratings and face to facelengths are optional withflexible installation throughloose hub slip flanges.Available as 3-Piece valvewith screwed or weldedconnectionFlanged valve with thirdparty approval to BS5351with fire test certificationto EN 10497. 15 to 40mmvalves are supplied fullbore as standardReduced Bore flangedvalve with third partyapproval to BS5351 withfire test certification toEN 10497. Also availableas cryogenic C51/52The Enviro-Safe valvefeatures a unique dualsealing stem arrangementwhich ensures highintegrity combined withlong life. Ideally suited fortoxic media such asphosgene and chlorine.Fire safe version availableas EF51/52Designed for use on themajority of hydrocarbonand chemical lines. TheF53 meets DIN 3202Col.F4 face to face with theF54 meeting Col.F12-Piece Reduced Boreflanged valveFull Bore flanged valvewith third party approvalto BS5351 with fire testcertification to EN 10497The Worcester V seatcan be fitted into mostversions of the reducedbore flanged valve toprovide control on a widerange of applicationsSoft seatsFire SafeAnti Blow OutAnti StaticTA-Luft / EPADIN & ANSI RatingsLow Temp. CS Body1-piece DesignISO 5211 mounting plateSoft & metal seatsFire SafeAnti Blow OutAnti StaticTA-Luft / EPADIN & ANSI RatingsLow Temp. CS BodySplit Body DesignISO 5211 mounting plateSoft & metal seatsFire SafeAnti Blow OutAnti StaticTA-Luft / EPADIN & ANSI RatingsLow Temp. CS BodySplit Body Design6 7

Flanged Ball Valves (Continued)Butterfly ValvesManufacturerArgusArgusMcCanna Noble Alloy DurcoSerck Audco ValvesSerck Audco ValvesDurcoSerck Audco ValvesProductTypeFK79HK35McCannaNAVMicrofinishSuper 'H'DIPVBX2001SlimsealDesignFloating BallTrunnion MountedTop EntryHigh SpecificationFlanged BallPressure BalancedPressure Balanced DoubleIsolation Plug ValveHigh PerformanceBonded LinearSize Range15-100 mmFull & Reduced Bore40-400 mmFull & Reduced Bore15-500mmReduced Bore15-400mmFull Bore6-25mm 3 piece15-50mm flanged cast6-450mm flanged forged15-200mmReduced Bore15-200mmFull Bore15-900mm50-600mm50-900mm50-600mmPressure Rating19 bar (Class 150)50 bar (Class 300)100 bar (Class 600)150 bar (Class 900)250 bar (Class 1500)100 bar (Class 600)150 bar (Class 900)250 bar (Class 1500)ANSI Class 150ANSI Class 300ANSI Class 600ANSI Class 900ANSI Class 1500Up to Class 1500 - depending onsize and valve type20 bar (Class 150)50 bar (Class 300)to ANSI Class 2500to ANSI Class 250020 bar (Class 150)50 bar (Class 300)PN10 - PN4016 barEnd ConnectionsMetric DIN PN RatingANSI Class RatingMetric DIN PN RatingANSI Class RatingScrewed (NPT)WeldedFlangedFlangedScrewedWeldedANSI Class 150ANSI Class 300FlangedButt WeldScrewedHub EndCompact FlangeFlangedButt WeldHub EndCompact FlangeWafer - FlangelessWafer - LuggedWafer - FlangelessWafer - LuggedBody MaterialsStainless Steel(Forged & Cast)Carbon Steel(Forged & Cast)DuplexSpecial MaterialsStainless Steel(Forged & Cast)Carbon Steel(Forged & Cast)DuplexSpecial MaterialsStainless SteelCarbon SteelTitaniumHastelloyOther ExoticsStainless SteelHastelloy, InconelTitanium, ZirconiumAlloy 20, DuplexUltimet & othersCarbon SteelStainless SteelCarbon SteelsDuplex/Super Duplex StainlessSteelsAlloy SteelCarbon SteelsDuplex/Super Duplex StainlessSteelsAlloy SteelStainless SteelCarbon SteelCarbon SteelSG IronSeat MaterialsPTFEPOMLyton (PEEK)Arguloy (Metal Seated)POMLyton (PEEK)Arguloy (Metal Seated)Virgin & Filled PTFE(Carbon and Graphite)PEEKMetalCeramicsUHMWPEPTFEMetalVirgin & Filled PTFEDurlon II (PTFE)Carbon SteelsStainless SteelsDuplex Stainless SteelsElectroless Nickel PlatingHard FacingsCarbon SteelsStainless SteelsDuplex Stainless SteelsElectroless Nickel PlatingHard FacingsInconel, UHMWPEPFA/VitonStainless SteelNitrileEPDMApplication &OptionsISO 5211 mounting plateSoft & metal seatsFire SafeAnti Blow OutAnti StaticTA-Luft / EPADIN & ANSI RatingsLow Temp. CS BodySplit Body DesignISO 5211 mounting plateSoft & metal seatsFire SafeAnti Blow OutAnti StaticTA-Luft / EPADIN & ANSI RatingsLow Temp. CS BodySplit Body DesignSevere service high temperatures,corrosives, abrasives, slurries,firesafe, fugitive emissions,cryogenicsForged and precision cast ballvalves in a wide range of materialsfor tough service and highpressure applicationsFlanged ball valve designed toAmerican standards for thepetrochemical industryTight Shut off applicationsGas Transmission &distributionUpstream Oil IndustryMining and abrasive serviceNACE ApplicationsTight Shut off applicationsManifold Double IsolationBlock and BleedGas Transmission &distributionUpstream Oil IndustryMining and abrasive serviceNACE ApplicationsA double offset highperformance butterfly valvedesigned for a wide range ofapplications within thepetrochemical industryGeneral purpose butterfly valvefor use in a wide range ofapplications8 9

Lined ValvesManufacturerAtomacAtomac Atomac AtomacAtomac Atomac Atomac Atomac Atomac Durco DurcoProductTypeAKH2.2AKH2(A)AKH3AMP3AKH5AKH6AKH2 300 lbs.AtoPro AtostarBTV 2000 & BTV-LP(Long Pattern)T4E - LineDesignFull Bore BallFull Bore BallReduced Bore3-WayCeramic BallTank DrainFull Bore 300 lbs.Ball ValveSampling SystemStainlessLined ButterflyLined PlugSize Range15-100mm AKH2.2Full Bore DIN - ANSILong Pattern15-300mm AKH2Full Bore Long Pattern25-150mm AKH2AFull Bore Short Pattern15mm-300mmReduced BoreShort Pattern25mm-100mmFull Bore DIN - ANSI25mm-100mmFull BoreLong Pattern25mm-200mmReducing25mm-150mm25mm-80mm25mm-100mmFull Bore DIN - ANSILong Pattern50-600mm15-300mmReduced BorePressure Rating19 bar (Class 150)16 bar (PN16)19 bar (Class 150)16 bar (PN16)19 bar (Class 150)19 bar (Class 150)16 bar (PN16)19 bar (Class 150)16 bar (PN16)19 bar (Class 150)16 bar (PN16)50 bar (Class 300)16 bar (PN16)19 bar (Class 150)16 bar (PN16)19 bar (Class 150)16 bar (PN10/16)19 bar (Class 150)50 bar (Class 300)16 bar (PN16)End ConnectionsANSI Class 150Metric PN16ANSI Class 150Metric PN16ANSI Class 150J1S 10KANSI Class 150Metric PN16ANSI Class 150Metric PN10Metric PN16ANSI Class 150(200mm PN10)Metric PN16ANSI Class 300PN16ANSI Class 150Metric PN16JIS 10KWafer - FlangelessLug - FlangelessANSI & DINT4E1 ANSI Class 150 lbsT4E2 DIN PN16T4E3 ANSI Class 300 lbsBody MaterialsDuctile IronDuctile IronDuctile IronDuctile IronDuctile IronDuctile IronCarbon SteelDuctile IronStainless SteelStainless SteelDuctile IronStainless SteelDuctile Cast IronStainless SteelSeat MaterialsFEP/PFAPFA-Land othersFEPPFAPFA-L (Conductive)FEPPFAPFA-C (Conductive)and othersFEPPFAPFA-C (Conductive)Zirconia CeramicFEPPFAPFA-C (Conductive)PFAStainlessPFAoptional PFA-conductiveFEPPFAPFA-C (Conductive)PTFEPTFE-ConductiveUHMWPEDurlonPFAApplication &OptionsThe AKH2.2 is a full portlong pattern length fullylined valve for corrosionresistance. With metal tometal body joint. Patentno. EP 0 645 565 BIThe AKH2 is a full portANSI or DIN long patternlength fully lined valve forcorrosion resistance.The AKH2A is the full portANSI short pattern lengthversionThe AKH3 is a reducedbore fully lined valve toANSI length allowing forinterchangeability withexisting valves. Availablewith JIS flange connectionsCompact design 3-Wayvalve offering 90º and 180ºoperation with L or T portballs to provide a variety offlow configurationsThe AKH5 has a fullceramic liner and isdesigned for abrasiveslurries, high temperaturecorrosives and applicationswith high temperaturefluctuations. Available toDIN and ANSI lengthsDesigned with a largerinlet port the valve isprimarily used for tankdrainage. Provided withlong service liners withinert non-stick propertiesmake it ideal for viscous orhigh purity servicesThe AKH2 is a full portClass 300 long patternfully PFA lined ball valve.Suitable for use as controlor on/off valve undersevere service conditionsThe AtoPro is a newdesign high integrity linedball valve sampling system.For manual / automated /safety systems. Samplecapacities 15, 45 and90cm³The Atostar lined stainlesssteel armoured valve isrecommended for foodand beverage,pharmaceutical, conductorand offshore industrySpecifically designed forthe chemical industries.Provides triple stemsealing, Viton energisedseats and also a widevariety of alloy discs.BTV-LP recommendedin combination with heavyduty lined pipingThe T4E-Line is a PFA*lined plug valve for thechemical andpharmaceutical industries*PFA material FDA approved10 11

Non-Lubricated Plug ValvesOther ValvesManufacturerDurco Durco Durco Durco Durco Durco DurcoArgusArgusWorcesterProductTypeG4G4EG4ZG4Z-HFG4BTSG4Mach 1BK/MK8/10EK80TMBVDesignSleeved PlugEuropa PlugFire SealedAlkylationMarathonSevere ServiceSeated PlugHigh PressureCompactTrunnion MountedSize Range15-450mmReduced Bore15-150mmReduced Bore15-450mmReduced Bore15-450mmReduced Bore15-450mmReduced Bore15-300mmReduced Bore25-150mmReduced bore6-50mmFull Bore15-100mmFull Bore50-750mmReduced & Full BorePressure Rating19 bar (Class 150)50 bar (Class 300)10 bar (PN10)16 bar (PN16)25 bar (PN25)40 bar (PN40)19 bar (Class 150)50 bar (Class 300)19 bar (Class 150)50 bar (Class 300)102 bar (Class 600) 50mmNote - Class 600 derated19 bar (Class 150)50 bar (Class 300)PN10-PN4019 bar (Class 150)50 bar (Class 300)19 bar (Class 150)50 bar (Class 300)102 bar (Class 600)Note - Class 600 derated500 bar (6-10mm)400 bar (12mm)315 bar (20-50mm)100 bar (6-50mm)16 bar (100mm)40 bar (15-80mm)Class 150/300/600(50-750mm)Class 900/1500/2500(50-500mm)End ConnectionsANSI Class 150 (G411)ANSI Class 300 (G431)ScrewedButt WeldSocket WeldMetric PN10Metric PN16Metric PN25Metric PN40ANSI Class 150 (G411)ANSI Class 300 (G431)ScrewedButt WeldSocket WeldANSI Class 150ANSI Class 300ScrewedButt WeldSocket WeldANSI Class 150ANSI Class 300ScrewedButt WeldSocket WeldANSI Class 150ANSI Class 300ANSI Class 150ANSI Class 300ScrewedSocket WeldFlanged - WaferFlangedButt WeldBody MaterialsDuctile Cast IronStainless SteelCarbon SteelDurcomet, DurimetInconel, Monel, AlloysDuctile Cast IronStainless SteelCarbon SteelDurcomet, DurimetInconel, Monel, AlloysDuctile Cast IronStainless SteelCarbon SteelDurcomet, DurimetInconel, Monel, AlloysMonelDuctile Cast IronStainless SteelCarbon SteelDurcomet, DurimetInconel, Monel, AlloysDuctile Cast IronStainless SteelCarbon SteelDurcomet, DurimetInconel, Monel, AlloysDuctile Cast IronStainless SteelCarbon SteelDurcomet, DurimetInconel, Monel, AlloysStainless SteelCarbon SteelStainless SteelStainless SteelCarbon SteelDuplexAlloysSeat MaterialsPTFEDurlon IIUHMWPETFEGPTFEDurlon IIUHMWPETFEGPTFEDurlon IIUHMWPETFEGPTFEDurlon IIUHMWPETFEGPTFEDurlon IIUHMWPETFEGPTFEDurlon IIUHMWPETFEGPFA Encapsulated 316(Hastelloy and otheralloys available)PTFEPTFEPTFEFilled PTFEPEEKNylonApplication &OptionsThe G4 Sleeveline valve isa non-lubricated plug valvemanufactured in a widerange of materials tomeet the demands of thechemical industryThe G4E Sleeveline valve isa non-lubricated plug valvemanufactured to DIN faceto face dimensions to suitthe European marketThe G4Z has been firetested in accordance withAPI 607 and is providedwith graphoil stem sealsto reduce atmosphericleakage should fire destroythe PTFE sleeveThe G4Z-HF is specificallydesigned and refineryproven for use on HFAlkylation with bonnet andflanges painted with HFdetection paintThe G4B Marathon valve isdesigned for high cyclingon-off applications ormodulating service andcomes with a 3 yearperformance guaranteeagainst stem seal failureThe TSG4 is a triple sealedvalve designed for lethal,toxic and sub-zero fluidservices. Stem sealingexceeds the Clean Air Actfugitive emissionsregulationsThe Mach 1 is a nonlubricated plug valvewith a replaceable seatproviding lower operatingtorques and highertemperature capabilityA one piece valve of ruggedconstruction for use on highpressure water, oil and gasCompact design ball valve forinstallation between metric flangesfor the chemical industryWorcester’s Trunnion Mounted BallValves are manufactured in a rangeof sizes and pressure ratings tohandle a number of refineryapplications12 13

¼-Turn ActuatorsManufacturerNorbroNorbro Norbro NorbroNorbroAutomax Automax Automax AutomaxProductType40R33R SeriesP61 Series72 Series75 SeriesSuperNovaSXL SeriesRI SeriesR SeriesDesignRack & Pinion180°3 StageElectri-SafeElectricRack & PinionStainless SteelGear OverrideHeavy Duty Scotch YokeTorque Range11 to 4617 Nmat 5.5 bar96 to 2309 Nmat 5.5 bar11 to 263 Nm(End of Spring)90 to 147 Nm13 to 276 Nm17 to 3441 Nmat 5.5 bar17 to 526 Nmat 5.5 barUp to 6600 Nm3057 to 19012 Nmat 5.5 barSupply Pressure /VoltageUp to 8.3 barUp to 8.3 barUp to 8.3 bar24 VDC120 VAC, 240 VAC12 VDC, 24 VDC120 VAC, 240 VACUp to 8.0 barUp to 8.0 barN/AUp to 7 barTemperature Range-50 Deg C to+150 Deg C-50 Deg C to+150 Deg C-20 Deg C to+100 Deg C-32 Deg C to+65 Deg C-40 Deg C (with heater) to +65Deg C-50 Deg C to+150 Deg C-50 Deg C to+150 Deg C-50 Deg C to+150 Deg C-30 Deg C to+80 Deg CTravel StopsOptionalOptionalStandardStandardOptionalStandardStandardStandardDesign OptionsFast acting90º stop position120º rotationFail openPositioner, PID Control180º Centre off, HeaterMechanical brake180º optionLimit switchesLock out and vent valvesManual OverrideApplication &OptionsHigh performance quality actuatorcombining reliability, long life andease of maintenance withoperational safety180º actuator using standardNorbro 40R series design conceptfor use on diverter valves.120º option also availableDesigned to provide rapid,repeatable and highly accuratefilling control for all weigh /measuring processesAn electro-hydraulic actuatorbased upon the Norbro 40Rproviding a true spring returnelectric actuator for fail safesystemsRugged design single phaseelectric actuator designed foron / off applications butadaptable to meet the increasingdemand for analog and digitalcontrol. Available in AC and DCversionsAluminium rack and pinionactuator with integral limit stopsas standard allowing for openand closed position adjustmentThe SXL uses a 316 stainlesssteel body and can be suppliedwith either aluminium orstainless steel pistons. Optionalpolished finish is also availablefor sanitary applicationsThe RI Series provides foursizes of de-clutchable gearboxes for the manual overrideof double acting and springreturn actuatorsWith a unique bearing designthe R series is able to provideincreased torque and cycle lifecompared to standard Scotchyoke actuators14 15

Regional HeadquartersFlowserve America1978 Foreman Drive,Cookeville, TN 38501 USATelephone: +1 931 432 4021Fax: +1 931 431 3105Flowserve Asia12 Tuas Avenue 20, 638824Republic of SingaporeTelephone: +65 862 3332Fax: +65 862 4940Flowserve EMABurrell Road, Haywards Heath,West Sussex, England RH16 1TLTelephone: +44 (0)1444 314 400Fax: +44 (0)1444 314 401FCD FCEBR1002-02 Printed in UK (Replaces FCEBR1002-01)To find your local Flowserve representative:For more information about Flowserve Corporation,visit www.flowserve.comDue to continuous development of our product range, we reserve the right to alter the dimensions and information contained in this leaflet as required.Information given in this leaflet is made in good faith and based upon specific testing but does not, however, constitute a guarantee.Main Sales OfficesEurope, Middle East, AfricaBelgiumTel: +32 2 7149950Fax: +32 2 7149951Germany (Atomac/Durco)Tel: +49 2561 686100Fax: +49 2561 686200Germany (Argus/Automax)Tel: +49 72 43 103-0Fax: +49 72 43 103-222ItalyTel: +39 02 663251Fax: +39 02 6151863NetherlandsTel: +31 165 598800Fax: +31 165 555670PortugalTel: +351 22 619 87 70Fax: +351 22 610 75 75SpainTel: +34 915 152 032Fax: +34 915 152 036South AfricaTel: +27 11 397 3150Fax: +27 11 397 5300United KingdomTel: +44 (0)1444 314400Fax: +44 (0)1444 314401Asia/AustraliaAustraliaTel: +61 3 9795 3300Fax: +61 3 9795 3301China (Beijing)Tel: +86 10 6561 1900Fax: +86 10 6561 1899China (Shanghai)Tel: +86 21 6391 3355Fax: +86 21 6391 3374