Process Valve & Actuator Product Guide - Flowserve

Lined ValvesManufacturerAtomacAtomac Atomac AtomacAtomac Atomac Atomac Atomac Atomac Durco DurcoProductTypeAKH2.2AKH2(A)AKH3AMP3AKH5AKH6AKH2 300 lbs.AtoPro AtostarBTV 2000 & BTV-LP(Long Pattern)T4E - LineDesignFull Bore BallFull Bore BallReduced Bore3-WayCeramic BallTank DrainFull Bore 300 lbs.Ball ValveSampling SystemStainlessLined ButterflyLined PlugSize Range15-100mm AKH2.2Full Bore DIN - ANSILong Pattern15-300mm AKH2Full Bore Long Pattern25-150mm AKH2AFull Bore Short Pattern15mm-300mmReduced BoreShort Pattern25mm-100mmFull Bore DIN - ANSI25mm-100mmFull BoreLong Pattern25mm-200mmReducing25mm-150mm25mm-80mm25mm-100mmFull Bore DIN - ANSILong Pattern50-600mm15-300mmReduced BorePressure Rating19 bar (Class 150)16 bar (PN16)19 bar (Class 150)16 bar (PN16)19 bar (Class 150)19 bar (Class 150)16 bar (PN16)19 bar (Class 150)16 bar (PN16)19 bar (Class 150)16 bar (PN16)50 bar (Class 300)16 bar (PN16)19 bar (Class 150)16 bar (PN16)19 bar (Class 150)16 bar (PN10/16)19 bar (Class 150)50 bar (Class 300)16 bar (PN16)End ConnectionsANSI Class 150Metric PN16ANSI Class 150Metric PN16ANSI Class 150J1S 10KANSI Class 150Metric PN16ANSI Class 150Metric PN10Metric PN16ANSI Class 150(200mm PN10)Metric PN16ANSI Class 300PN16ANSI Class 150Metric PN16JIS 10KWafer - FlangelessLug - FlangelessANSI & DINT4E1 ANSI Class 150 lbsT4E2 DIN PN16T4E3 ANSI Class 300 lbsBody MaterialsDuctile IronDuctile IronDuctile IronDuctile IronDuctile IronDuctile IronCarbon SteelDuctile IronStainless SteelStainless SteelDuctile IronStainless SteelDuctile Cast IronStainless SteelSeat MaterialsFEP/PFAPFA-Land othersFEPPFAPFA-L (Conductive)FEPPFAPFA-C (Conductive)and othersFEPPFAPFA-C (Conductive)Zirconia CeramicFEPPFAPFA-C (Conductive)PFAStainlessPFAoptional PFA-conductiveFEPPFAPFA-C (Conductive)PTFEPTFE-ConductiveUHMWPEDurlonPFAApplication &OptionsThe AKH2.2 is a full portlong pattern length fullylined valve for corrosionresistance. With metal tometal body joint. Patentno. EP 0 645 565 BIThe AKH2 is a full portANSI or DIN long patternlength fully lined valve forcorrosion resistance.The AKH2A is the full portANSI short pattern lengthversionThe AKH3 is a reducedbore fully lined valve toANSI length allowing forinterchangeability withexisting valves. Availablewith JIS flange connectionsCompact design 3-Wayvalve offering 90º and 180ºoperation with L or T portballs to provide a variety offlow configurationsThe AKH5 has a fullceramic liner and isdesigned for abrasiveslurries, high temperaturecorrosives and applicationswith high temperaturefluctuations. Available toDIN and ANSI lengthsDesigned with a largerinlet port the valve isprimarily used for tankdrainage. Provided withlong service liners withinert non-stick propertiesmake it ideal for viscous orhigh purity servicesThe AKH2 is a full portClass 300 long patternfully PFA lined ball valve.Suitable for use as controlor on/off valve undersevere service conditionsThe AtoPro is a newdesign high integrity linedball valve sampling system.For manual / automated /safety systems. Samplecapacities 15, 45 and90cm³The Atostar lined stainlesssteel armoured valve isrecommended for foodand beverage,pharmaceutical, conductorand offshore industrySpecifically designed forthe chemical industries.Provides triple stemsealing, Viton energisedseats and also a widevariety of alloy discs.BTV-LP recommendedin combination with heavyduty lined pipingThe T4E-Line is a PFA*lined plug valve for thechemical andpharmaceutical industries*PFA material FDA approved10 11