SUNNY BOY 2500 / 3000 - Installation Guide - Sinetech
SUNNY BOY 2500 / 3000 - Installation Guide - Sinetech
SUNNY BOY 2500 / 3000 - Installation Guide - Sinetech
- No tags were found...
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
SMA Solar Technology AGOpening and Closing the Sunny Boy6 Opening and Closing the Sunny Boy6.1 Safety instructionsIf you need to open the device for whatever reason, pay attention to section 2.5 „Safetyinstructions“ (8).DANGER!Danger to life due to high voltages in the Sunny Boy!• Before working on the Sunny Boy with the cover removed, the AC and DC voltagesmust therefore be disconnected from the Sunny Boy and the capacitors must bedischarged (wait for 15 minutes after isolating the AC and DC voltages).NOTICE!Electrostatic discharges can damage the Sunny Boy!Electronic components are susceptible to electrostatic charge.• Discharge any electrostatic charge by touching the grounded housing while handlingany electronic component.<strong>Installation</strong> <strong>Guide</strong> SB25_30-IEN083212 33