english

CAN-BUS on all receiversAll the central units have the CAN-BUS interface as standard.The CAN interface is used to:- read the proportional and ON/OFF manoeuvres that the operatorperforms on the PCU- send the information to be shown on the PCU, with the LEDs, with h thebuzzer, with the display- send the CU set change and slowdown commands (and therefore alsomanoeuvre lock commands)- The free Scanreco “GraphicConfigurator” program allows to customers to designand test its proper display layout.An electronic control unit is needed by the client that then processes thedata gathered on the machine and sends the messages to the radiocontrol.Protocol available: CanOpen only (no CanKingdom, , no J1939, noProfibus)2224/06/2011