english

More documents

Recommendations

Info

Topics covered in this document:Scanreco RC400 G2B radio controls1. G2B / 1-way and 2-way (can-bus)2. Main differences compared to G2A3. Similarities with G2A4. New opportunities offered by the 2-way displays5. Information required to define the radio control6. Diagnostic mode224/06/2011
G2B: 1-way 1and 2-way2Communication between the transmitter (PCU) and the receiver (CU)Communication can be:- in one direction only (one-way or simplex)- in two directions (two-way or duplex)- EU (433 MHz) and NAFTA (900 MHz) transmission frequencies- Automatic frequency hopping on 50 of the 67 channels available324/06/2011
Page 1: Scanreco RC400 - G2B System124/06/2
Page 5 and 6: Commands on the PCUType of ON/OFF o
Page 7 and 8: Number of ON/OFF channels available
Page 9 and 10: Inputs under the switch-plates- min
Page 12 and 13: EX1EX2what G2were like1224/06/2011
Page 14 and 15: Types of panels for DUPLEX versions
Page 16 and 17: More screen to alternateExample of
Page 18 and 19: Speeds (and SETs) ) availablePARAME
Page 20 and 21: G2B Programming steps (2 of 2)Step
Page 22 and 23: CAN-BUS on all receiversAll the cen
Page 24 and 25: Example of application with CANBUSI
Page 26 and 27: Other differences between G1/G2 and
Page 28 and 29: Multi Transmitter ModePCU1Multiple
Page 30 and 31: Questions to identify which version
Page 32 and 33: Diagnostic modeThere are 8 diagnost
Page 34 and 35: Types of CU available3424/06/2011
Page 36: FABER-COM G2B standard - manoeuvre

english

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?