english

Diagnostic modeThere are 8 diagnostic steps. Move on to the next step by pressing theON button once (as in programming mode).Information contained in the various steps0 - the current SET (step zero)1 - calibration (the actual output value) of all the proportional outputs2 - the activation status of the 14 ON/OFF outputs on the CU3 - the activation status of the 4 inputs on the CU4 - the last five error codes that occurredDi 00 (SET1) / Di 00. (SET2) / Di 0.0. (SET3)Di 01 1A 35Di 02 On 01 00 On 02 00 On 03 01 … up to On 14 00Di 03 In 01 00 In 02 00 In 03 01 In 04 00Di 04 15 1A …Save current calibrationReload original calibration(dir, start, stop, micro and ramps)(if saved beforehand)3224/06/2011