Arctic LTE Gateway User Manual - Viola Systems
Arctic LTE Gateway User Manual - Viola Systems
Arctic LTE Gateway User Manual - Viola Systems
- No tags were found...
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>User</strong> <strong>Manual</strong><strong>Arctic</strong> <strong>LTE</strong> <strong>Gateway</strong>2.5.3 Serial port 2Table 14: Serial port 2Figure 7. Connector diagram Table 15:Connector pinoutPin1 DCD2 RXD3 TXD4 DTR5 GND6 DSR7 RTS8 CTS9 RIFunctionTable 16: Serial portconfigurationBaud rate 115 -230400Data bits 8ParityStop bits 1FlowcontrolNo parityNo flowcontrolSerial port 2 supports only RS-232 data mode.2.6 Power switch and reset buttonPower switch is located on back panel. It turns the unit on and off.Reset button is located on front panel. Press shortly to reset the unit. Resetbutton can be used to restore factory default settings. To restore factorydefault settings, reset the unit by keeping the reset button pressed down untilall the status LEDs blink. This indicates the factory presets have been applied.2.7 Power connector<strong>Arctic</strong> <strong>LTE</strong> has a 3-pin power connector. Pinout and voltage limits aredescribed in table 17. Supplied plug type is Phoenix Contact MC 1,5 / 3-STF-3,5 with screw fastening.Firmware Version 2.4.x 16 Document Version 1
Change language