Interoperability SHDSL products - OneAccess extranet

Interoperability SHDSL productsversions.10. 143X SHDSL CPEThis section defines interoperability of the 1431 and 1432 SHDSL CPEs for its specific InterworkingFunctions (IWF) ATM CES, FRF.5, FRF.8 and ATM switching (ATM over E1).Set-upInteroperability issuesUse line/timingMode = synchronous (default) and ATMencapsulation (default).143X143X143XATM DSLAMInteroperable for CES, FRF and ATM over E1 with ATMDSLAMs (not with Ethernet DSLAMs). See document‘S(H)DSL CPE - DSLAM Interoperability overview’ fordetailed information on interoperability tests that havebeen done with specific DSLAMs.11. 2400 SeriesSet-upInteroperability issuesInteroperable2400 Series142X2400 Series143XInteroperable for CES, FRF and ATMover E1 if the 2400 Series is configuredin ATM switching mode. For Ethernettraffic, always interoperable. Especiallyfor CES traffic, the 2400 does notsupport ATM QoS. Therefore thiscombination is to be avoided.In general interoperable with ADSL resp.SHDSL CPEs with ATM encapsulationover the line.2400 SeriesOther DSL CPEs12. User speed interoperabilityThe SHDSL recommendation defines line pair speeds between 192 and 2312kbit/s. The OneAccess devicessupport the 64Kbit/s multiples (except 2312kbit/s on the 1431 and 2400 Series). On some devices also lowerOneAccess Version 4.4 - 22 January 2008 12 / 14