VMG Blow Gun

10Related Products: Filter RegulatorSeries AW30/40Integration of afilter and regulatorallows simplewiring.AW40Direct operated type,Relieving typeOption specifications AccessoryAWFilterregulatorBody size30401 230 F 03 BE 1N3 83 4Thread typeNilMetric thread (M5)RcNote 1)NNPTF Note 2) GNote 1) Drain guide is NPT1/4(applicable to AW30 and 40),and the exhaust port for autodrain comes with ø3/8" Onetouchfitting (applicable toAW30 and 40).Note 2) Drain guide is G1/4(applicable to AW30 and 40).How to OrderOption specificationsSymbol1 Note 1)268JNRWZNote 2)Note 3)AccessorySymbolNilB Note 1)CDEContents0.02 to 0.2MPa settingMetal bowlNylon bowlMetal bowl with level gaugeDrain guide 1/4Non-relievingFlow direction: Right LeftDrain cock with barb fitting: ø6 x ø4 nylon tubeDisplay units for product name plate, caution plate for bowl, and pressure gauge: PSI, FContents—Applicable modelsAW30/40AW30/40AW30/40AW30/40AW30/40AW30/40AW30/40AW30/40AW30/40When more than one specification is required, indicate in ascending alphabeticalorder.Note 1) The only difference from the standard specifications is the adjustingspring for the regulator. It does not restrict the setting of 0.2MPa or more.Note 2) Without valve function.Note 3) For M5 and NPT thread types. Under the New Measurement Law, thistype is only sold outside Japan. (The SI unit is used inside Japan.)Applicable models—AW30/40AW30/40AW30/40AW30/40AW30/40AW30/40With bracketPort sizeFloat type auto-drain (N.C)02 1 Float type auto-drain (N.O)JIS Symbol4With square embedded type pressure gauge (with limit indicator)03 3 8Note 2) G With round pressure gauge (with limit indicator)04 1 2P Panel mount (with set nut)Proof pressure1.5MPaSet nutAR30P-260S AR40P-260S AR40P-260SMaximum operating pressure1.0MPaRoundRegulating pressure rangeG36-10-01 G46-10-02 G46-10-020.05 to 0.85MPa1.0MPaNote 2)Square Note 3)Pressure gauge port size Note 1) 1 8 1 41 PressureGC3-10AS GC3-10AS GC3-10AS4 embedded type06Note 1) Bracket assembly is not mounted at the time of shipment, but rather packagedtogether with the filter regulator for shipment.Note 2) Mounting thread for pressure gauge: AW30—1/8; AR40 to 60—1/4.Pressure gauge is not mounted at the time of shipment, but rather packagedtogether with the regulator for shipment.Accessory/: Combination available : Combination not availableOption Specifications Combinations: Varies depending on the model : Available only with NPT threadAccessory/CombinationAccessoryOption specificationsApplicable filter regulatorSymbolOption specificationsB C D E G P 1 2 6 8 C J N R W Z AW30/40With bracket (with set nut)BFloat type auto drain (N.C.)CFloat type auto drain (N.O.)DSquare embedded type pressure gaugeERound pressure gaugeGPanel mount (with set nut)P0.02 to 0.2MPa setting–1Metal bowl–2Nylon bowl–6Metal bowl with level gauge–8With bowl guard–CDrain guide 1 4 –JNon-relieving type–NFlow direction: Right Left–RDrain cock with barb fitting: ø6 x ø4 nylon tubing–WDisplay units for product name plate, caution plate for bowl, and pressure gauge: PSI, F –ZStandard SpecificationsAccessory Part No.ModelAW30 AW40 AW40-06Applicable modelPort size1 4 , 3 8 1 4 , 3 8 , 1 23 4 AccessoryAW30AW40 AW40-06FluidAirNote 1)Bracket assemblyAR30P-270AS AR40P-270AS AR40P-270ASRelief pressureSet pressure + 0.05MPa (at relief flow rate of 0.1l/min(ANR)) gaugeRoundG36-2-01 G46-2-02 G46-2-020.2MPaAmbient and fluid temperature 5 to 60 Square Note 3)C (With no condensation)embedded type GC3-2AS GC3-2AS GC3-2ASNominal filtration rating5µmNote 4)Float typeN.O.AD38AD48AD48Drain capacity (cm 3 )25 45 45 auto-drainN.C.AD37AD47AD47Bowl materialPolycarbonateNote 1) Assembly includes a bracket and set nuts.ConstructionRelieving typeNote 2) in part numbers of the round pressure gauge indicates a type of connectionWeight (kg)0.40 0.72 0.75thread. No indication is necessary for R; however, indicate N for NPT. Pleasecontact SMC regarding the connection thread NPT and supply of the pressureOption Bowl guard gauge for PSI unit specifications.Note 1) The type with square embedded pressure gauge does Note 3) Includes one O-ring and 2 mounting screws.Note 4) Minimum operating pressure: N.O. type—0.1MPa; N.C. type—0.1MPa AD17, AD27not have connection threads.and 0.15MPa for AD37, AD47. Please contact SMC regarding the specifications forPSI unit and F.15-7-10