PRIMERGY RX200 S4 - Nettailer

More documents

Recommendations

Info

System configurator and order-information guideB PRIMERGY RX200 S4 Status 2009-05-28Base unit without CPU and Memory S26361-K1167-V101Rack version for 19'' racks with1 hot plug power supply moduleNo Rack-mounting kit includedFor an orderable basic unit one CPU = first CPU,one memory = first memory as well as one of twopossible rack-mount kit options has to be selectedS26113-F527-E12nd redundant PSU module For later conversion the following kit is available:for redundancy 1.) 1 power supply module hot plug S26113-F527-L1uses hot plug PSU slot incl. power cordmax. 1x per systemS26361-F2735-E101 S26361-F2735-E110 S26361-F2735-E111RMK-F1_1-2U Server RMK-P_1-2U Server No Rackmount-Kit optiontelescopic rail, full extraction, telescopic rail, partial extraction Only for loose deliveries1-hand-mounting lower costs option No mounting in Racks possibleconsisting of consisting of max. 1x per system- 1 pair of telescopic rails - 1 pair of telescopic railswith easy-mounting-clips with partial extraction1x per system 1x per systemS26361-F2735-E8CCabel arm for 1U Server- for FSC Primecenter / S26361-F2735-L101Datacenter Racks S26361-F2735-L110- for 3rd Party racks RMK_1U Server1x per system for loose deliverypartial extraction is lower costversion of RMK. Server could notcompletly pulled out of the RackPRIMERGY PRIMECENTER-rack In case nor cable arm is ordered,S26361-F1647-E302Installation ex works for oneServer must be prevent of beeingpulledout.S26361-F2735-L8server or subsystem. Cabel arm for 1U ServerHereby the rack will be delivered for loose deliverycompletely pre-mounted andall wired connections are tested.S26361-F2735-L7With racks 12U, 24U, 38U: Cable management PC-RackSystems and components - for FSC Primecenterwill be delivered installed in the rack - one additional U is neededWith racks 46U: for cable routing at the sideSystems and componentswill be delivered separately PRIMERGY 42/23U rackTo be ordered only together with PRIMERGY Classic 19" rack is not supporteda PRIMERGY PRIMECENTER racke . g . : "Rack-mounting ex factory"S26361-K826-V10xrefer configurator PC-RackThis service is to be ordered onceper installable server/storagemax. 1x per System subsystem, in order to get theserver/storage subsystemmounted into the PRIMERGY racks.In case of the 46 U PRIMERGY Rack,this service has to be ordered,to get the mounting kits and thecables installed.CFujitsu Technology Solutions x86 PRIMERGY Server 8 of 20
System configurator and order-information guideC PRIMERGY RX200 S4 Status 2009-05-28Section II ProcessorThere are 2 processor LGA771 sockets available.The first socket is always equipped with the first CPUIt is also possible to upgrade a dual-processor system later on with a second CPUA multi-processor operating system is required for a dual-processor system.Max. two CPU`s can be selected per basic unitOne of following CPU´s has to be selected as first CPUfor an orderable basic unitOptional second CPU has to be the same type like the first CPUDual-Core CPU`s- 1x 64-bit Intel Xeon DP (6MB shared SLC = Second Level Cache )and with passive 1066 or heat 1333MHz sinkFrontside Busoccupies socket for one CPUXeon DP E5205 (1.86GHz/6M/1066) / 65WS26361-F3881-E186Xeon DP X5260 (3.33GHz/6M/1333) / 80WS26361-F3881-E333Xeon DP X5270 (3.50GHz/6M/1333) / 80WS26361-F3881-E350Quad-Core CPU`s- 1x 64-bit Intel Xeon DP (2x6MB shared SLC = Second Level Cache )and with passive 1066 or heat 1333MHz sinkFrontside Busoccupies socket for one CPUXeon DP E5405 (2.00GHz/2x6M/1333) / 80W S26361-F3880-E200Xeon DP E5420 (2.50GHz/2x6M/1333) / 80W S26361-F3880-E250Xeon DP E5430 (2.66GHz/2x6M/1333) / 80W S26361-F3880-E266Xeon DP E5440 (2.83GHz/2x6M/1333) / 80W S26361-F3880-E283Xeon DP X5460 (3.16GHz/2x6M/1333) / 120W S26361-F3880-E316Xeon DP X5470 (3.33GHz/2x6M/1333) / 80W S26361-F3880-E333Low Voltage Dual-Core CPU`s- 1x 64-bit Intel Xeon DP (6MB shared SLC = Second Level Cache )and with passive 1066 or heat 1333MHz sinkFrontside Busoccupies socket for one CPUXeon LV DP L5240 (3.00GHz/6M/1333) / 40W S26361-F3881-E500Low Voltage Quad-Core CPU`s- 1x 64-bit Intel Xeon DP (2x4MB shared SLC = Second Level Cache )and with passive 1066 or heat 1333MHz sinkFrontside Busoccupies socket for one CPUXeon LV DP L5310 (1.60GHz/2x4M/1066) / 50WXeon LV DP L5410 (2.33GHz 2x6M/1333) / 50WXeon LV DP L5420 (2.50GHz 2x6M/1333) / 50WXeon LV DP L5430 (2.66GHz 2x6M/1333) / 50WS26361-F3866-E460S26361-F3880-E533S26361-F3880-E550S26361-F3880-E566DFujitsu Technology Solutions x86 PRIMERGY Server 9 of 20
Page 1 and 2: PRIMERGY RX200 S4System configurato
Page 3 and 4: System configurator and order-infor
Page 7: System configurator and order-infor
Page 15 and 16: S y s t e m c o n f i g u r a t o r

PRIMERGY RX200 S4 - Nettailer

Create successful ePaper yourself

Delete template?

Save as template?