MTS Connect 3G on basis of UMTS/EDGE/GPRS

More documents

Recommendations

Info

7. Starting the MTC <strong>Connect</strong> ProgramENGAfter the modem is installed, the MTC <strong>Connect</strong> programis launched automatically. Then, every time the modemis connected to the PC, the MTC <strong>Connect</strong> program willbe launched automatically.You can also double-click the shortcut icon on thedesktop to launch the MTC <strong>Connect</strong> program.8. Uninstalling the MTC <strong>Connect</strong> Program1. Click Start menu > Control Panel.2. Click Add/Remove program to uninstall the MTC <strong>Connect</strong>program.Note:It is recommended to restart the PC after the uninstallationto ensure that the MTC <strong>Connect</strong> programis completely uninstalled.9. Removing the Modem1. Double-click in the system tray. The Unplug or EjectHardware interface is displayed.2. Select the hardware related to the modem and click Stop.3. When the prompt "It is safe to remove the device»is displayed, remove the modem.Note:Before removing the modem, exit the MTC <strong>Connect</strong>program.10. Safety InformationRead the safety information carefully to ensure thecorrect and safe use of your wireless device.11. InterferenceDo not use your modem if its using is prohibited or whenit may cause danger to or interference with operationof electric devices.6
12. Medical DeviceENG• Some wireless devices may affect the performance of thehearing aids. For any such problems, consult your serviceprovider.• If you are using an electronic medical device, consult thedoctor or device manufacturer to confirm whether theradio wave affects the operation of this device.13. Area with Inflammables and ExplosivesTo prevent explosions and fires in areas that are storedwith inflammable and explosive devices, do not use yourwireless device and observe the rules. Areas stored withinflammables and explosives include but are not limitedto the following:• Gas station• Fuel depot (such as the bunk below the deck of a ship)• Container/Vehicle for storing or transporting fuelsor chemical products• Area where the air contains chemical substances andparticles (such as granule, dust, or metal powder)• Area indicated with the "Explosives" sign• Area indicated with the "Power off bi-direction wirelessequipment" sign• Area where you are generally suggested to stop theengine of a vehicle14. Traffic Security• Observe local laws and regulations while using thewireless device. To prevent accidents, do not use yourwireless device while driving.• RF signals may affect electronic systems of motorvehicles. For more information, consult the vehiclemanufacturer.• In a motor vehicle, do not place the wireless device overthe air bag or in the air bag deployment area.• Otherwise, the wireless device may hurt you owing to theemergency activation of the air bag.• Observe the rules and regulations of airline companies.When boarding, switch off your wireless device.Otherwise, the radio signal of the wireless device mayinterfere with the plane control signals.7
Page 1 and 2: ENGInstruction for quickset up USB
Page 3 and 4: 1. IntroThank you for choosing this
Page 5: ENGNote:Micro SD card is an optiona
Page 9 and 10: 20. Care and MaintenanceENG• It i

MTS Connect 3G on basis of UMTS/EDGE/GPRS

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?