EM powerLED PRO EZ-3, 4 W - Tridonic

Emergency lighting unitsEM powerLEDMechanichal detailsCase manufactured from polycarbonate.Glow-wire test according to EN 61347-1 with increased temperature of 850 °Cpassed.LED bi-colour status indicator• Green / red• Mounting hole 6.5 mm dia• Lead length 1,000 mm• Insulation rating: 90 °CTest switch• Mounting hole 7.0 mm dia• Lead length 550 mmBattery leads• Quantity: 1 red and 1 black• Length: 1,300 mm• Wire type: 0.5 mm 2 solid conductor• Insulation rating: 90 °CBattery end terminationPush on 4.8 mm receptacle to suit battery spade fitted with insulating coverWiring type and cross sectionWiringmains (SL, N, L)LED (LED +, LED –)Wiringbatteries (Bat +, Bat –)test switch (switch)status indication LED (status K, A)Use one wire for each terminal connector only.Max. lead insulation diameterBattery2.1 mmTest switch2.1 mmIndicator LED2.1 mm0.5 – 1.5 mm² solid or fine-stranded0.5 – 1.0 mm² fine-stranded with ferrule8.5 – 9.5 mm0.2 – 0.5 mm² solid or fine-stranded0.25 mm² fine-stranded with ferrule8.5 – 9.5 mmModule end termination8.0 mm stripped insulationTwo-piece batteries are supplied with a 200 mm lead with 4.8 mm receptacles ateach end and insulating covers to connect the separate sticks together.Maximum lead lengthLEDstatus indication LEDbatteries3 m1 m1 mRecommended fixing details for clip fixing125,20,4 mm to 0,6 mm thick gear trayfixing slots4,3 x 9,3 mmRelease of the wiringPress down the “push button” and removethe cable from front.122,40,6 mm to 1,1 mm thick gear trayMaximum loading of automatic circuit breakersAutomatic circuit breaker type B10 B13 B16 B20 Inrush currentInstallation Ø 1.5 mm 2 1.5 mm 2 2.5 mm 2 2.5 mm 2 I maxTimeEM powerLED 4 W PRO EZ-3 90 130 130 130 10 A 120 μsEM powerLED 4 W PRO EZ-3 NiMh 90 130 130 130 10 A 120 μsData sheet 03/15-EM001-11Subject to change without notice.www.tridonic.com 8