Dodge Ram 2500 & 3500 - 2010-Newer Installation ... - RealTruck.com

More documents

Recommendations

Info

AMP RESEARCH POWER STEP – DODGE RAMThe jogs in the lower part of the linkages point toward one another, as shown, Drive (motor) Linkagein the Front and Idler Linkage in the Rear. Note: Linkage position described in parts list on page 3.616Slide mounting T-Nut of board into position and attach to linkages. The end of board/end cap willallign fl ush with Rear Linkage.Torque to 10 ft-lbs.(13.5 Nm)712173/16”NOTE: Skip steps 18-22 on Mega Cab models. Mega Cabmodels do not take Support Bracket.9www.amp-research.<strong>com</strong> 8/13IM75143 rev 04.12.12
AMP RESEARCH POWER STEP – DODGE RAMRear Support. Preassemble Bracket Insert withHex Bolt and Washer and insert into body supportmember above Idler Linkage.Position Bracket Insert assembly with the longend of the insert pointing toward the center of thetruck (inboard) leaving enough threads for bracketinstallation.17171981918 SEE MEGA CAB NOTE ABOVE 19 12Position Support Bracket as shown below, restingagainst rear face of Idler Linkage and slotted endaround hanging bolt and washer from step 16.1988With Support Bracket flush to the sheet metal andupper Hex Bolt snug, shift bracket until slot lines upwith the threaded hole. Insert Flange Bolt.16161820 716721With bolts snug and bracket squarely mounted to trucksheet metal and Linkage Assembly, tighten both HexBolts to 16 ft-lbs with 13mm wrench or socket.22 9Torque to 16 ft-lbs.(22 Nm)www.amp-research.<strong>com</strong> 9/13IM75143 rev 04.12.1213mm13mm
Page 1: INSTALLATION GUIDEAPPLICATION MODEL
Page 5 and 6: AMP RESEARCH POWER STEP - DODGE RAM
Page 7: AMP RESEARCH POWER STEP - DODGE RAM
Page 13 and 14: AMP RESEARCH POWER STEP - DODGE RAM

Dodge Ram 2500 & 3500 - 2010-Newer Installation ... - RealTruck.com

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?