DynojetPS08:Layout 1.qxd - Dynojet Research

4-112Ignition Quick ShifterStand alone universal moduleFeatures• User adjustable “kill times”• Each gear can have its own setting• Uses any of the Dynojet Quick Shifter sensors• Universal fitThis unit allows any vehicle with 4 cylinders or less (motorcycle,ATV, mini sprint, etc.) to have quick shifter functionality withoutthe need for a Power Commander. It comes with “coil cap” styleconnectors for easy installation on most late model motorcycles.For applications that do not have this style of coil the connectorscan be removed and the unit hard wired in.DescriptionIgnition Quick Shifter (stand alone unit) 4-112Quick Shifter AccessoriesShift Rod Tension Sensor (Pull Type) 4-101Shift Rod Pressure Sensor (Push Type) 4-102Linear Sensor (Pull Type) including mounting kit 4-103Linear Sensor (Push Type) including mounting kit 4-104Handlebar Switch 4-105Dealer Universal Shift Rod Kit (Rods - A, B, C, D) 4-106Shift Rod Tension Sensor (Pull Type) m6 - 5/16 UNF threads 4-107Shift Rod Tension Sensor (Pull Type) m6 - 5/16 UNF threads 4-108HD Softail, Dyna, Touring Model Shift Rod Kit (except Wide Glide) 4-109HD V-Rod Shift Rod Kit 4-110Female/Female Shift Rod A (Black Anodized Aluminum) 32104060Male/Male Shift Rod B (Black Anodized Aluminum) 32104050Male/Female M6 Shift Rod C (Black Anodized Aluminum) 32104030Male/Female M8/M6 Shift Rod D (Black Anodized Aluminum) 32105030The Ignition Quick Shifter incorporates a gear position input so that the “kill times” can be adjusted for each gear.“Kill time” can be set shorter in high gears, while also allowing smoother and more positive shifts in lower gears(particularly the 1-2 sift).Additionally the unit features “Intellishift”. The controller automatically staggers the “kill times” to cylinder for increasedsmoothness during lower rpm, part throttle shifts.No computer is required for setup. Installation can be done in as little as 30 minutes. Must be used with one of the3 DQS shift sensors (sold separately).17